PDRP-2001 Datasheet, PDF (94/140 Pages) Systemsensor advanced ideas. – Deluge Preaction Control Panel

Operating Instructions
Read Status
4.16.3 Output Circuits
Pressing 3 while viewing Read Status Screen #1 will display the following screens:
READ STATUS
1=FACP CONFIG
2=INPUT ZONES
3=OUTPUT CIRCUITS
Read Status Screen #1
READ OUTPUTS
1=OUTPUT 1
2=OUTPUT 2
3=OUTPUT 3
Read Outputs Screen #1
READ OUTPUTS
1=OUTPUT 4
Read Outputs Screen #2
READ STATUS
1=CROSS INPUT ZONES
2=ON-BOARD RELAYS
3=SYSTEM SETTINGS
Read Status Screen #2
The operator can press 1 to view the programmed options for Output 1, 2 to view the programmed
options for Output 2, 3 to view the programmed options for Output 3 or 4 to view the programmed
options for Output 4.
The resulting screens will display the following information:
• Enable/Disable Status
• Circuit Type
• Silenceable/Nonsilenceable
• Auto Silence Enable/Disable and time delay (in minutes)
• Silence Inhibit Enabled/Disabled
• Coding Selection (Temporal, Steady, etc.)
4.16.4 Cross Input Zones
Pressing 1 while viewing Read Status Screen #2 will display the following screens:
CROSS INPUT ZONES
1=RELEASE 1
2=RELEASE 2
Cross Input Zone Screen
Pressing 1 for Release 1 or 2 for Release 2 will display the cross-zoning, if any, for the selected
Releasing Circuit as illustrated in the following screen:
CROSS ZONE REL 1
X14
NONE
NONE
Cross Input Zone Screen
The Cross Zone Release screen displays the zones that have been cross-zoned. In this example,
Zone 1 is cross-zoned with Zone 4.
94
PDRP-2001 Series PN 53043:A 5/08/2007