PDRP-2001 Datasheet, PDF (108/140 Pages) Systemsensor advanced ideas. – Deluge Preaction Control Panel

FACP Configuration Templates
Input-to-Output Circuit Mapping and Cross-Zone Operation
APPENDIX B
FACP Configuration Templates
The PDRP-2001 has been provided with preprogrammed templates which allow the user to quickly
configure the FACP [refer to "FACP CONFIG (Application Templates)" on page 50]. The user
also has the option to reprogram selected portions of the template for customized applications. The
following pages of this appendix describe the programming for each of the templates.
Note: PDRP-2001 Pre-Action/Deluge Control Panel can be configured using preprogrammed
Templates 7 through 13 only. Template 7 is the factory default template for the FACP.
(Templates 1 through 6 are not available for this panel.)
Important! Each Template has been programmed with specific Input Zone Types and Output
Circuit Types. If the FACP is configured with one of the preprogrammed Templates, the user must
ensure that the devices connected to each Input Zone and Output Circuit are compatible with the
programmed types. (The user can reprogram the circuit types if desired).
108
PDRP-2001 Series PN 53043:A 5/08/2007