C8051F330-GMR Datasheet, PDF (88/210 Pages) Silicon Laboratories – Mixed-Signal ISP Flash MCU

C8051F330/1/2/3/4/5
SFR Definition 9.9. EIE1: Extended Interrupt Enable 1
R/W
ET3
Bit7
R/W
Reserved
Bit6
R/W
ECP0
Bit5
R/W
EPCA0
Bit4
R/W
EADC0
Bit3
R/W
R/W
EWADC0 Reserved
Bit2
Bit1
R/W
ESMB0
Bit0
Reset Value
00000000
SFR Address:
0xE6
Bit7:
Bit6:
Bit5:
Bit4:
Bit3:
Bit2:
Bit1:
Bit0:
ET3: Enable Timer 3 Interrupt.
This bit sets the masking of the Timer 3 interrupt.
0: Disable Timer 3 interrupts.
1: Enable interrupt requests generated by the TF3L or TF3H flags.
RESERVED. Read = 0. Must Write 0.
ECP0: Enable Comparator0 (CP0) Interrupt.
This bit sets the masking of the CP0 interrupt.
0: Disable CP0 interrupts.
1: Enable interrupt requests generated by the CP0RIF or CP0FIF flags.
EPCA0: Enable Programmable Counter Array (PCA0) Interrupt.
This bit sets the masking of the PCA0 interrupts.
0: Disable all PCA0 interrupts.
1: Enable interrupt requests generated by PCA0.
EADC0: Enable ADC0 Conversion Complete Interrupt.
This bit sets the masking of the ADC0 Conversion Complete interrupt.
0: Disable ADC0 Conversion Complete interrupt.
1: Enable interrupt requests generated by the AD0INT flag.
EWADC0: Enable Window Comparison ADC0 Interrupt.
This bit sets the masking of ADC0 Window Comparison interrupt.
0: Disable ADC0 Window Comparison interrupt.
1: Enable interrupt requests generated by ADC0 Window Compare flag (AD0WINT).
RESERVED. Read = 0. Must Write 0.
ESMB0: Enable SMBus (SMB0) Interrupt.
This bit sets the masking of the SMB0 interrupt.
0: Disable all SMB0 interrupts.
1: Enable interrupt requests generated by SMB0.
Rev. 1.7
91