7733 Datasheet, PDF (873/940 Pages) Renesas Technology Corp – 16-BIT SINGLE-CHIP MICROCOMPUTER

ELECTRICAL CHARACTERISTICS
15.3 Electrical characteristics 15.4 A-D converter characteristics
ELECTRICAL CHARACTERISTICS (Vcc= 5 V, Vss = 0 V, Ta = –20 to 85 °C, unless otherwise noted)
Symbol Parameter
Measuring conditions
Limits
Min. Typ. Max. ^Unit
Vcc = 5 V,
f(XIN) = 25 MHz (Square waveform),
(f(f2) = 12.5 MHz),
f(XCIN) = 32.768 kHz,
in operating (Note 1)
9.5 19 mA
Vcc = 5V,
f(XIN) = 25 MHz (Square waveform),
(f(f2) = 1.5625 MHz),
f(XCIN) : Stopped,
ICC
Power source
current
In single-chip
mode, output pins
are open, and the
other pins are con-
nected to Vss.
in operating (Note 1)
Vcc = 5V,
f(XIN) = 25 MHz (Square waveform),
f(XCIN) = 32.768 kHz,
when the WIT instruction is executed
Vcc = 5 V,
(Note
2)
1.3 2.6 mA
10 20 µA
f(XIN) : Stopped,
f(XCIN) : 32.768 kHz,
in operating (Note 3)
50 100 µA
Vcc = 5 V,
f(XIN) : Stopped,
f(XCIN) : 32.768 kHz,
when the WIT instruction is executed (Note 4)
5 10 µA
Ta = 25 °C,
when clock is stopped
1 µA
Ta = 85 °C,
when clock is stopped
20 µA
Notes 1: This is applied when the main clock external input selection bit = “1,” the main clock division
selection bit = “0,” and the signal output disable selection bit = “1.”
2: This is applied when the main clock external input selection bit = “1” and the system clock stop
selection bit at wait state = “1.”
3: This is applied when the CPU and the clock timer are operating with the sub clock (32.768 kHz)
selected as the system clock.
4: This is applied when the XCOUT drivability selection bit = “0” and the system clock stop bit at wait
state = “1.”
7736 Group User’s Manual
15–5