7733 Datasheet, PDF (168/940 Pages) Renesas Technology Corp – 16-BIT SINGLE-CHIP MICROCOMPUTER

TIMER B
7.2 Block description
7.2.2 Count start flag
This register is used to start or stop counting. Each bit of this register corresponds to each timer, respectively.
Figure 7.2.2 shows the structure of the count start flag.
b7 b6 b5 b4 b3 b2 b1 b0
Count start flag (address 4016)
Bit
Bit name
0 Timer A0 count start flag
1 Timer A1 count start flag
2 Timer A2 count start flag
3 Timer A3 count start flag
4 Timer A4 count start flag
5 Timer B0 count start flag
6 Timer B1 count start flag
7 Timer B2 count start flag
Functions
0: Counting is stopped.
1: Counting is started.
represents that bits 0 to 4 are not used for timer B.
Fig. 7.2.2 Structure of count start flag
At reset RW
0 RW
0 RW
0 RW
0 RW
0 RW
0 RW
0 RW
0 RW
7733 Group User’s Manual
7–5