HD6433694 Datasheet, PDF (287/432 Pages) Renesas Technology Corp – 16-Bit Single-Chip Microcomputer H8 Family/H8/300H Tiny Series

Table 16.3 A/D Conversion Time (Single Mode)
Item
Symbol Min
A/D conversion start delay time t_D
6
Input sampling time
t
—
SPL
A/D conversion time
t
CONV
131
Note: All values represent the number of states.
CKS = 0
Typ Max
—
9
31
—
—
134
CKS = 1
Min Typ Max
4
—
5
— 15
—
69 —
70
16.4.4 External Trigger Input Timing
A/D conversion can also be started by an external trigger input. When the TRGE bit in ADCR is
set to 1, external trigger input is enabled at the ADTRG pin. A falling edge at the ADTRG input
pin sets the ADST bit in ADCSR to 1, starting A/D conversion. Other operations, in both single
and scan modes, are the same as when the bit ADST has been set to 1 by software. Figure 16.3
shows the timing.
ø
ADTRG
Internal trigger signal
ADST
A/D conversion
Figure 16.3 External Trigger Input Timing
Rev. 4.00, 03/04, page 259 of 400