HD6433694 Datasheet, PDF (211/432 Pages) Renesas Technology Corp – 16-Bit Single-Chip Microcomputer H8 Family/H8/300H Tiny Series

14.3.5 Serial Mode Register (SMR)
SMR is used to set the SCI3’s serial transfer format and select the on-chip baud rate generator
clock source.
Initial
Bit
Bit Name Value R/W Description
7
COM
0
R/W Communication Mode
0: Asynchronous mode
1: Clocked synchronous mode
6
CHR
0
R/W Character Length (enabled only in asynchronous mode)
0: Selects 8 bits as the data length.
1: Selects 7 bits as the data length.
5
PE
0
R/W Parity Enable (enabled only in asynchronous mode)
When this bit is set to 1, the parity bit is added to transmit
data before transmission, and the parity bit is checked in
reception.
4
PM
0
R/W Parity Mode (enabled only when the PE bit is 1 in
asynchronous mode)
0: Selects even parity.
1: Selects odd parity.
3
STOP
0
R/W Stop Bit Length (enabled only in asynchronous mode)
Selects the stop bit length in transmission.
0: 1 stop bit
1: 2 stop bits
For reception, only the first stop bit is checked, regardless
of the value in the bit. If the second stop bit is 0, it is
treated as the start bit of the next transmit character.
2
MP
0
R/W Multiprocessor Mode
When this bit is set to 1, the multiprocessor
communication function is enabled. The PE bit and PM
bit settings are invalid. In clocked synchronous mode, this
bit should be cleared to 0.
Rev. 4.00, 03/04, page 183 of 400