PIC16LF1454 Datasheet, PDF (360/418 Pages) Microchip Technology – 14/20-Pin Flash, 8-Bit USB Microcontrollers with XLP Technology

PIC16(L)F1454/5/9
29.3 DC Characteristics: PIC16(L)F1454/5/9-I/E (Power-Down)
PIC16LF1454/5/9
PIC16F1454/5/9
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  TA  +125°C for extended
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  TA  +125°C for extended
Param
No.
D022
Device Characteristics Min.
Power-down Current (IPD)⁽²⁾
—
—
Typ†
Max.
+85°C
Max.
+125°C
Units
0.025 —
0.035 —
—
A
—
A
D022
D022A
D023
D023
— 0.20 —
— 0.25 —
— 0.30 —
—
10
—
—
11
—
—
12
—
— 0.29 —
— 0.39 —
— 10.5 —
— 11.3
—
— 12.5 —
—
A
—
A
—
A
—
A
—
A
—
A
—
A
—
A
—
A
—
A
—
A
Conditions
VDD
Note
1.8 Base Current: WDT, BOR, FVR,
3.0 ^{and SOSC disabled, all Peripher-}
als inactive
2.3 WDT, BOR, FVR, and SOSC dis-
3.0 ^{abled, all Peripherals inactive}
(VREGPM = 1; Low-Power mode)
5.0
2.3 Base Current: WDT, BOR, FVR
3.0 ^{and SOSC disabled, all peripheral}
inactive (VREGPM = 0; Normal
5.0 _{Power mode)}
1.8 LPWDT Current (Note 1)
3.0
2.3 LPWDT Current (Note 1)
3.0
5.0
D023A
—
14
—
—
23
—
—
A
1.8 FVR current (Note 1)
—
A
3.0
D023A
D024
—
23
—
—
30
—
—
34
—
—
7
—
—
A
2.3 FVR current (Note 1)
—
A
3.0
—
A
5.0
—
A
3.0 BOR Current (Note 1)
D024
D24A
D24A
—
15
—
—
17
—
—
0.1
—
—
11
—
—
A
3.0 BOR Current (Note 1)
—
A
5.0
—
A
3.0 LPBOR Current (Note 1)
—
A
3.0 LPBOR Current (Note 1)
—
12
—
—
A
5.0
* These parameters are characterized but not tested.
† Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are
not tested.
Note 1:
The peripheral current is the sum of the base IDD or IPD and the additional current consumed when this peripheral is
enabled. The peripheral  current can be determined by subtracting the base IDD or IPD current from this limit. Max
values should be used when calculating total current consumption.
2: The power-down current in Sleep mode does not depend on the oscillator type. Power-down current is measured with
the part in Sleep mode, with all I/O pins in high-impedance state and tied to VDD.
3: A/D oscillator source is FRC.
DS41639A-page 360
Preliminary
 2012 Microchip Technology Inc.