PIC32MX1XX_12 Datasheet, PDF (266/328 Pages) Microchip Technology – 32-bit Microcontrollers (up to 128 KB Flash and 32 KB SRAM) with Audio and Graphics Interfaces, USB, and Advanced Analog

PIC32MX1XX/2XX
TABLE 29-29: SPIx MODULE SLAVE MODE (CKE = 1) TIMING REQUIREMENTS (CONTINUED)
AC CHARACTERISTICS
Standard Operating Conditions: 2.3V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
-40°C  TA  +105°C for V-temp
Param.
No.
Symbol
Characteristics⁽¹⁾
Min. Typical⁽²⁾ Max. Units
Conditions
SP51
TSSH2DOZ SSx  to SDOX Output
High-Impedance
(Note 4)
5
—
25 ns
—
SP52 TSCH2SSH SSx  after SCKx Edge
TSCK +
—
— ns
—
TSCL2SSH
20
SP60 TSSL2DOV SDOx Data Output Valid after
—
—
25 ns
—
SSx Edge
Note 1: These parameters are characterized, but not tested in manufacturing.
2: Data in “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
3: The minimum clock period for SCKx is 50 ns.
4: Assumes 50 pF load on all SPIx pins.
DS61168E-page 266
Preliminary
 2011-2012 Microchip Technology Inc.