409-10029 Datasheet, PDF(19/31 Page) Tyco Electronics – When reading this manual, pay particular attention to DANGER, CAUTION, and NOTE statements.

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

409-10029 Datasheet, PDF (19/31 Pages) Tyco Electronics – When reading this manual, pay particular attention to DANGER, CAUTION, and NOTE statements.

◁

Stripping Module 1490503-[ ] and 1490501-[ ]

409-10029

Air Blast Duration Select Button The

provides a means of selecting one of four preset durations

Air Blast Duration Select Button for the air blast pulse. To set the level, press and hold the

for

about one second until all the error LEDs turn on. Releasing the button will allow one to four LEDs

Air Blast Duration to remain lit, indicating the level of the air blast. Momentarily pressing the

Select Button will toggle through the levels. When the desired level is reached, press and hold the

Air Blast Duration Select Button until the error LED indicators turn off. The new level is automatiÄ

cally stored. Releasing the button returns the stripping module to normal operation,

Each LED corresponds to a preset air blast duration, increasing in duration from left to right. The

illuminated LED corresponds to the currently selected duration of the air blast. The more LED's

illuminated, the longer the duration of the air blast. (One LED lit indicates the shortest air blast; four

LEDs lit indicates the longest air blast.)

Transfer Return Delay Select The

Button provides a means of selecting one of four preset delays. The

delay occurs after the air blast to allow the operator more time to remove terminated wire before the strip

Transfer Return Delay Select assembly returns to the start position. To set the level, press and hold the

button for one second until all the error LEDs are lit. Releasing the button will leave on one to four LEDs,

indicating the level of the delay. (One LED lit indicates the shortest delay; four LEDs lit indicates the longÄ

est delay.) When the desired level is reached, press and hold the button until all the error LEDs turn off.

The new level is automatically stored. Releasing the button returns the stripping module to normal operaÄ

tion.

Transfer Return Delay Momentarily pressing the

button will toggle through the levels.

Figure 9 (Sheet 3 of 3)

C Rev

Tyco Electronics Corporation

19 of 31

▷