MC9S12DP256B Datasheet, PDF (93/126 Pages) Freescale Semiconductor, Inc – device made up of standard HCS12 blocks and the HCS12 processor core

Freescale Semicon_Md_Cu₉c_S1t₂o_Dr_P,₂I₅n_6Bc_D._{evice User Guide — V02.15}
A.1.10 Supply Currents
This section describes the current consumption characteristics of the device as well as the conditions for
the measurements.
A.1.10.1 Measurement Conditions
All measurements are without output loads. Unless otherwise noted the currents are measured in single
chip mode, internal voltage regulator enabled and at 25MHz bus frequency using a 4MHz oscillator in
Colpitts mode. Production testing is performed using a square wave signal at the EXTAL input.
A.1.10.2 Additional Remarks
In expanded modes the currents flowing in the system are highly dependent on the load at the address, data
and control signals as well as on the duty cycle of those signals. No generally applicable numbers can be
95
For More Information On This Product,
Go to: www.freescale.com