English
Language : 

MC705P6ACPE Datasheet, PDF (87/98 Pages) Freescale Semiconductor, Inc – M68HC05 Microcontrollers
◁
14.6 3.3-Volt DC Electrical Charactertistics
3.3-Volt DC Electrical Charactertistics
Characteristic(1)
Symbol
Min
Typ(2)
Max
Unit
Output voltage
ILoad = 10.0 µA
ILoad = –10.0 µA
VOL
—
—
VOH
VDD –0.1
—
0.1
V
—
Output high voltage
(ILoad = –0.2 mA) PA0:7, PB5:7, PC2:7, PD5, TCMP
(ILoad = –1.2 mA) PC0:1
VOH
VDD –0.3
—
VDD –0.3
—
—
V
—
Output low voltage
(ILoad = 0.4 mA) PA0:7, PB5:7, PC2:7, PD5, TCMP
(ILoad = 2.5 mA) PC0:1
VOL
—
—
0.3
V
—
—
0.3
Input high voltage
PA0:7, PB5:7, PC0:7, PD5, TCAP/PD7, IRQ/VPP, RESET,
OSC1
VIH
0.7 x VDD
—
VDD
V
Input low voltage
PA0:7, PB5:7, PC0:7, PD5, TCAP/PD7, IRQ/VPP, RESET,
VIL
VSS
—
0.2 x VDD
V
OSC1
Supply current(3), (4)
Run
Wait(5) (A/D converter on)
Wait(5) (A/D converter off)
Stop(6)
25°C
0°C to +70°C (standard)
–40°C to +85°C (extended)
—
1.8
2.5
mA
—
1.0
1.4
mA
IDD
—
0.6
1.0
mA
—
2
20
µA
—
—
40
µA
—
—
50
µA
I/O ports high-z leakage current
PA0:7, PB5:7, PC0:7, PD5, TCAP/PD7
IIL
—
—
±10.0
µA
A/D ports hi-z leakage current
PC3:7
IOZ
—
—
±1.0
µA
Input current
RESET, IRQ/VPP, OSC1, PD7/TCAP
IIn
—
—
±1.0
µA
Input pullup current
PA0:7 (with pullup enabled)
IIn
75
175
350
µA
Capaitance
Ports (as input or output)
RESET, IRQ/VPP
COut
—
—
12
pF
CIn
—
—
8
1. VDD = 3.3 Vdc ± 0.3 Vdc, VSS = 0 Vdc, TA = –40°C to +85°C, unless otherwise noted. All values shown reflect pre-silicon
estimates.
2. Typical values at midpoint of voltage range, 25°C only.
3. Run (Operating) IDD, Wait IDD: To be measured using external square wave clock source (fosc = 4.2 MHz), all inputs 0.2 V
from rail; no dc loads, less than 50 pF on all outputs, CL = 20 pF on OSC2.
4. Wait, Stop IDD: All ports configured as inputs, VIL = 0.2 V, VIH = VDD –0.2 V.
5. Wait IDD will be affected linearly by the OSC2 capacitance.
6. Stop IDD to be measured with OSC1 = VSS.
MC68HC705P6A Advance Information Data Sheet, Rev. 2.1
Freescale Semiconductor
87
 ▷