MC9S08SH32CWL Datasheet, PDF (288/328 Pages) Freescale Semiconductor, Inc – MC9S08SH32 Series Features

Appendix A Electrical Characteristics
inputs are tied to an appropriate logic voltage level (for instance, either V_SS or V_DD) or the programmable
pull-up resistor associated with the pin is enabled.
Table A-2. Absolute Maximum Ratings
Rating
Symbol
Value
Unit
Supply voltage
Maximum current into V_DD
Digital input voltage
Instantaneous maximum current
Single pin limit (applies to all port pins)^{1, 2, 3}
V_DD
–0.3 to +5.8
V
I_DD
120
mA
V_In
–0.3 to V_DD + 0.3
V
I_D
± 25
mA
Storage temperature range
T_stg
–55 to 150
°C
1 _{Input must be current limited to the value specified. To determine the value of the required}
current-limiting resistor, calculate resistance values for positive (V_DD) and negative (V_SS) clamp
voltages, then use the larger of the two resistance values.
2 _{All functional non-supply pins except RESET are internally clamped to VSS and VDD. In}
MC9S08SH32, the RESET pin is named “PTA5/IRQ/TCLK/RESET.”
3 _{Power supply must maintain regulation within operating VDD range during instantaneous and}
operating maximum current conditions. If positive injection current (V_In > V_DD) is greater than
I_DD, the injection current may flow out of V_DD and could result in external power supply going
out of regulation. Ensure external V_DD load will shunt current greater than maximum injection
current. This will be the greatest risk when the MCU is not consuming power. Examples are: if
no system clock is present, or if the clock rate is very low (which would reduce overall power
consumption).
MC9S08SH32 Series Data Sheet, Rev. 2
288
Freescale Semiconductor
PRELIMINARY