LM3S6950 Datasheet, PDF (402/524 Pages) List of Unclassifed Manufacturers – Microcontroller

Ethernet Controller
Bit/Field
9
8
7
6
5
4
3
2
1
0
Name
RFAULT_IE
Type
R/W
ANEGCOMP_IE
R/W
JABBER_INT
RC
RXER_INT
RC
PRX_INT
RC
PDF_INT
RC
LPACK_INT
RC
LSCHG_INT
RC
RFAULT_INT
RC
ANEGCOMP_INT
RC
Reset
0
0
0
0
0
0
0
0
0
0
Description
Remote Fault Interrupt Enable
When set, enables system interrupts when a Remote Fault condition is
signaled by the link partner.
Auto-Negotiation Complete Interrupt Enable
When set, enables system interrupts when the Auto-Negotiation
sequence has completed successfully.
Jabber Event Interrupt
When set, indicates that a Jabber event has been detected by the
10Base-T circuitry.
Receive Error Interrupt
When set, indicates that a receive error has been detected by the PHY.
Page Receive Interrupt
When set, indicates that a new page has been received from the link
partner during Auto-Negotiation.
Parallel Detection Fault Interrupt
When set, indicates that a Parallel Detection Fault has been detected
by the PHY during the Auto-Negotiation process.
LP Acknowledge Interrupt
When set, indicates that an FLP burst has been received with the
Acknowledge bit set during Auto-Negotiation.
Link Status Change Interrupt
When set, indicates that the link status has changed from OK to FAIL.
Remote Fault Interrupt
When set, indicates that a Remote Fault condition has been signaled
by the link partner.
Auto-Negotiation Complete Interrupt
When set, indicates that the Auto-Negotiation sequence has completed
successfully.
402
June 14, 2007
Luminary Micro Confidential-Advance Product Information