LM3S2965 Datasheet, PDF (523/542 Pages) List of Unclassifed Manufacturers – Microcontroller

LM3S2965 Microcontroller
23 Electrical Characteristics
23.1
23.1.1
23.1.2
DC Characteristics
Maximum Ratings
The maximum ratings are the limits to which the device can be subjected without permanently
damaging the device.
Note: The device is not guaranteed to operate properly at the maximum ratings.
Table 23-1. Maximum Ratings
Characteristic
a
Symbol Value Unit
Min Max
I/O supply voltage (V_DD)
V_DD 0 4 V
Core supply voltage (V_DD25)
V_DD25 0 4 V
Analog supply voltage (V_DDA)
V_DDA 0 4 V
Battery supply voltage (V_BAT)
V_BAT 0 4 V
Input voltage
V_IN -0.3 5.5 V
Maximum current per output pins I
- 25 mA
a. Voltages are measured with respect to GND.
Important: This device contains circuitry to protect the inputs against damage due to high-static
voltages or electric fields; however, it is advised that normal precautions be taken to
avoid application of any voltage higher than maximum-rated voltages to this
high-impedance circuit. Reliability of operation is enhanced if unused inputs are
connected to an appropriate logic voltage level (for example, either GND or V_DD).
Recommended DC Operating Conditions
Table 23-2. Recommended DC Operating Conditions
Parameter Parameter Name
Min Nom Max Unit
V_DD
V_DD25
V_DDA
V_BAT
V_IH
V_IL
V_SIH
V_SIL
V_OH
V_OL
I_OH
I/O supply voltage
3.0
3.3
3.6
V
Core supply voltage
2.25 2.5 2.75
V
Analog supply voltage
3.0
3.3
3.6
V
Battery supply voltage
2.3
3.0
3.6
V
High-level input voltage
2.0
-
5.0
V
Low-level input voltage
-0.3
-
1.3
V
High-level input voltage for Schmitt trigger inputs 0.8 * V_DD -
V_DD
V
Low-level input voltage for Schmitt trigger inputs 0
- 0.2 * V_DD V
High-level output voltage
2.4
-
-
V
Low-level output voltage
-
-
0.4
V
High-level source current, V_OH=2.4 V
2-mA Drive 2.0
-
- mA
4-mA Drive 4.0
-
- mA
8-mA Drive 8.0
-
- mA
June 04, 2007
523
Preliminary