LM3S2965 Datasheet, PDF (331/542 Pages) List of Unclassifed Manufacturers – Microcontroller

LM3S2965 Microcontroller
14
14.1
Synchronous Serial Interface (SSI)
The Stellaris^® microcontroller includes two Synchronous Serial Interface (SSI) modules. Each SSI
is a master or slave interface for synchronous serial communication with peripheral devices that
have either Freescale SPI, MICROWIRE, or Texas Instruments synchronous serial interfaces.
Each Stellaris^® SSI module has the following features:
■ Master or slave operation
■ Programmable clock bit rate and prescale
■ Separate transmit and receive FIFOs, 16 bits wide, 8 locations deep
■ Programmable interface operation for Freescale SPI, MICROWIRE, or Texas Instruments
synchronous serial interfaces
■ Programmable data frame size from 4 to 16 bits
■ Internal loopback test mode for diagnostic/debug testing
Block Diagram
Figure 14-1. SSI Module Block Diagram
Interrupt
Control / Status
SSICR0
SSICR1
SSISR
Interrupt Control
SSIIM
SSIMIS
SSIRIS
SSIICR
SSIDR
System Clock
Identification Registers
SSIPCellID0
SSIPCellID1
SSIPCellID2
SSIPCellID3
SSIPeriphID0
SSIPeriphID1
SSIPeriphID2
SSIPeriphID3
SSIPeriphID4
SSIPeriphID5
SSIPeriphID6
SSIPeriphID7
Clock
Prescaler
SSICPSR
TxFIFO
8 x 16
.
.
.
RxFIFO
8 x 16
.
.
.
Transmit/
Receive
Logic
SSITx
SSIRx
SSIClk
SSIFss
14.2
Functional Description
The SSI performs serial-to-parallel conversion on data received from a peripheral device. The CPU
accesses data, control, and status information. The transmit and receive paths are buffered with
June 04, 2007
331
Preliminary