LM3S2965 Datasheet, PDF (512/542 Pages) List of Unclassifed Manufacturers – Microcontroller

Signal Tables
Pin Name
C0+
C0-
C0o
C1+
C1-
C2+
C2-
CAN0Rx
CAN0Tx
CAN1Rx
CAN1Tx
CCP0
CCP1
CCP2
CCP3
CCP4
CCP5
CMOD0
CMOD1
Fault
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GNDA
GNDA
Pin Number
90
92
58
24
91
23
22
10
11
47
61
66
43
67
95
96
40
65
76
99
9
15
21
33
39
45
54
57
63
69
82
87
94
4
97
Pin Type
I
I
O
I
I
I
I
I
O
I
O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Buffer Type Description
Analog Analog comparator 0 positive input
Analog Analog comparator 0 negative input
TTL
Analog comparator 0 output
Analog Analog comparator positive input
Analog Analog comparator 1 negative input
Analog Analog comparator positive input
Analog Analog comparator 2 negative input
TTL
CAN module 0 receive
TTL
CAN module 0 transmit
TTL
CAN module 1 receive
TTL
CAN module 1 transmit
TTL
Capture/Compare/PWM 0
TTL
Capture/Compare/PWM 1
TTL
Capture/Compare/PWM 2
TTL
Capture/Compare/PWM 3
TTL
Capture/Compare/PWM 4
TTL
Capture/Compare/PWM 5
TTL
CPU Mode bit 0. Input must be set to logic 0
(grounded); other encodings reserved.
TTL
CPU Mode bit 1. Input must be set to logic 0
(grounded); other encodings reserved.
TTL
PWM Fault
Power Ground reference for logic and I/O pins.
Power Ground reference for logic and I/O pins.
Power Ground reference for logic and I/O pins.
Power Ground reference for logic and I/O pins.
Power Ground reference for logic and I/O pins.
Power Ground reference for logic and I/O pins.
Power Ground reference for logic and I/O pins.
Power Ground reference for logic and I/O pins.
Power Ground reference for logic and I/O pins.
Power Ground reference for logic and I/O pins.
Power Ground reference for logic and I/O pins.
Power Ground reference for logic and I/O pins.
Power Ground reference for logic and I/O pins.
Power
The ground reference for the analog circuits
(ADC, Analog Comparators, etc.). These are
separated from GND to minimize the electrical
noise contained on VDD from affecting the
analog functions.
Power
The ground reference for the analog circuits
(ADC, Analog Comparators, etc.). These are
separated from GND to minimize the electrical
noise contained on VDD from affecting the
analog functions.
512
June 04, 2007
Preliminary