|
AK4492ECB Datasheet, PDF (11/101 Pages) Asahi Kasei Microsystems – Quality Oriented 32-Bit 2ch DAC | |||
|
◁ |
[AK4492]
6. Absolute Maximum Ratings
(AVSS = DVSS = VSSL = VSSR = VREFLL = VREFLR = 0 V; Note 5)
Parameter
Symbol
Min.
Max.
Unit
Power
Supplies:
Digital I/O
TVDDam
ï0.3
Digital Core
DVDDam
ï0.3
Clock Ineterface
AVDDam
ï0.3
Analog
VDDL/Ram ï0.3
|AVSS ï DVSS| (Note 6)
ïGND
-
6.0
V
2.5
V
6.0
V
6.0
V
0.3
V
Input Current, Any Pin Except Supplies
IIN
-
ï±10
mA
Digital Input Voltage (Note 7)
VIND
ï0.3 (TVDD+0.3) or 6.0 V
Ambient Temperature (Power supplied)
Ta
ï40
85
ï°C
Storage Temperature
Tstg
ï65
150
ï°C
Note 5. All voltages with respect to ground.
Note 6. AVSS, DVSS, VSSL and VSSR must be connected to the same analog ground plane.
Note 7. Max value of VIND is lower either of (TVDD + 0.3) or 6.0V.
WARNING: Operation at or beyond these limits may result in permanent damage to the device.
Normal operation is not guaranteed at these extremes.
7. Recommended Operating Conditions
(AVSS = DVSS = VSSL = VSSR = VREFLL = VREFLR = 0 V; Note 5)
Parameter
Symbol
Min.
Typ.
Max. Unit
â LDOE pin = âLâ
Digital I/O
TVDD
DVDD
1.8
3.6
V
Clock Ineterface
AVDD
DVDD
1.8
3.6
V
Digital Core
DVDD
1.7
1.8
1.98
V
Power Supplies
Analog
VDDL/R
4.75
5.0
5.25
V
â LDOE pin = âHâ
Digital I/O
TVDD
3.0
3.3
3.6
V
Clock Ineterface
AVDD
3.0
3.3
3.6
V
Analog
VDDL/R
4.75
5.0
5.25
V
Voltage Reference âHâ voltage reference VREFHL/R VDDL/R-0.5
-
VDDL/R V
(Note 8)
âLâ voltage reference VREFLL/R
-
VSSL/R
-
V
Note 5. All voltages with respect to ground.
Note 8. The analog output voltage scales with the voltage of (VREFHL/R ï VREFLL/R).
Note 9. TVDD and AVDD must be connected to the same ground plane and powered up at the same time.
When not using the LDO (LDOE pin = âLâ), all power supplies (DVDD (1.8V), TVDD and AVDD
(3.3V) and VDDL/R (5V)) should be powered up at the same time or sequentially in the order of
3.3V (TVDD, AVDD), 1.8V (DVDD) and 5V (VDDL/R).
Note 10. The internal LDO outputs DVDD (1.8V) when the LDOE pin = âHâ. 3.3V (TVDD and AVDD)
power supplies must be powered up before or at the same time with 5V (VDDL/R) power
supplies when the LDOE pin = âHâ.
* AKM assumes no responsibility for the usage beyond the conditions in this data sheet.
016011073-E-00
- 11 -
2016/12
|
▷ |