Z85C3008PEG Datasheet, PDF (53/81 Pages) Zilog, Inc. – CMOS SCC Serial Communications Controller

CMOS SCC Serial Communications Controller
Product Specification
45
Electrical Characteristics
The electrical characteristics of the Z80C30 and the Z85C30 devices are described in the
following sections.
Absolute Maximum Ratings
Stresses greater than those listed in Table 3 may cause permanent damage to the device
This is a stress rating only. Operation of the device at any condition above those indicated
in the operational sections of these specifications is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
Table 3. Absolute Maximum Ratings
Vcc Supply Voltage range
Voltages on all pins with respect to GND
T_A Operating Ambient Temperature
Storage Temperature
–0.3 V to +7.0 V
–3 V to VCC +0.3 V
See Ordering Information
–65° C to +150° C
Standard Test Conditions
The DC Characteristics and capacitance sections below apply for the following standard
test conditions, unless otherwise noted. All voltages are referenced to GND. Positive cur-
rent flows into the referenced pin. See Figure 27 and Figure 28.
• +4.50V  V_cc  + 5.50V
• GND = 0V
• T_A (see Ordering Information)
PS011706-0511
Electrical Characteristics