LM3S6952 Datasheet, PDF (299/626 Pages) Texas Instruments – Stellaris LM3S6952 Microcontroller

Stellaris® LM3S6952 Microcontroller
Bit/Field
7:4
Name
EM1
Type
R/W
Reset
0x0
Description
SS1 Trigger Select
This field selects the trigger source for Sample Sequencer 1.
The valid configurations for this field are:
Value
0x0
0x1
0x2
0x3
0x4
0x5
Event
Controller (default)
Analog Comparator 0
Analog Comparator 1
Analog Comparator 2
External (GPIO PB4)
Timer
In addition, the trigger must be enabled with the TnOTE bit in
the GPTMCTL register (see page 239).
0x6 PWM0
The PWM module 0 trigger can be configured with the PWM0
Interrupt and Trigger Enable (PWM0INTEN) register, see
page 512.
0x7 PWM1
The PWM module 1 trigger can be configured with the
PWM1INTEN register, see page 512.
0x8 PWM2
The PWM module 2 trigger can be configured with the
PWM2INTEN register, see page 512.
0x9-0xE reserved
0xF Always (continuously sample)
April 05, 2010
299
Texas Instruments-Production Data