|
UPSD3212C Datasheet, PDF (132/152 Pages) STMicroelectronics – Flash Programmable System Devices with 8032 Microcontroller Core and 16Kbit SRAM | |||
|
◁ |
UPSD3212C, UPSD3212CV
Table 96. External Data Memory AC Characteristics (with the 3V MCU Module)
Symbol
Parameter(1)
24MHz Oscillator
Min
Max
Variable Oscillator
1/tCLCL = 8 to 24MHz
Unit
Min
Max
tRLRH
RD pulse width
180
6tCLCL â 70
ns
tWLWH WR pulse width
180
6tCLCL â 70
ns
tLLAX2 Address hold after ALE
56
2tCLCL â 27
ns
tRHDX RD to valid data in
118
5tCLCL â 90 ns
tRHDX Data hold after RD
0
0
ns
tRHDZ Data float after RD
63
2tCLCL â 20 ns
tLLDV
ALE to valid data in
200
8tCLCL â 133 ns
tAVDV
Address to valid data in
220
9tCLCL â 155 ns
tLLWL
ALE to WR or RD
75
175
3tCLCL â 50 tCLCL + 50 ns
tAVWL Address valid to WR or RD
67
4tCLCL â 97
ns
tWHLH WR or RD High to ALE High
17
67
tCLCL â 25
tCLCL + 25
ns
tQVWX Data valid to WR transition
5
tCLCL â 37
ns
tQVWH Data set up before WR
170
7tCLCL â 122
ns
tWHQX Data hold after WR
15
tCLCL â 27
ns
tRLAZ
Address float after RD
0
0
ns
Note: 1. Conditions (in addition to those in Table 87, VCC = 3.0 to 3.6V): VSS = 0V; CL for Port 0, ALE and PSEN output is 100pF, for 5V
devices, and 50pF for 3V devices; CL for other outputs is 80pF, for 5V devices, and 50pF for 3V devices)
Table 97. A/D Analog Specification
Symbol
Parameter
AVREF
Analog Power Supply Input
Voltage Range
VAN
Analog Input Voltage Range
IAVDD
Current Following between VCC
and VSS
CAIN
Overall Accuracy
NNLE
Non-Linearity Error
NDNLE Differential Non-Linearity Error
NZOE
Zero-Offset Error
NFSE
Full Scale Error
NGE
Gain Error
TCONV Conversion Time
Test Condition
at 8MHz clock
Min.
Typ.
Max.
Unit
VSS
VSS â 0.3
VCC
V
AVREF + 0.3
V
200
µA
±2
l.s.b.
±2
l.s.b.
±2
l.s.b.
±2
l.s.b.
±2
l.s.b.
±2
l.s.b.
20
µs
132/152
|
▷ |