S70GL01GN00 Datasheet, PDF (68/83 Pages) SPANSION – 3.0 Volt-only Page Mode Flash Memory featuring 110 nm MirrorBit™ Process Technology

Advance Information
Absolute Maximum Ratings
Storage Temperature, Plastic Packages . . . . . . . . . . . . . . . . –65°C to +150°C
Ambient Temperature with Power Applied . . . . . . . . . . . . . . –65°C to +125°C
Voltage with Respect to Ground:
V_CC 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .–0.5 V to +4.0 V
V_IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .–0.5 V to +4.0 V
A9, OE#, and ACC 2 . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to +12.5 V
All other pins 1 . . . . . . . . . . . . . . . . . . . . . . . . . .–0.5 V to V_CC + 0.5V
Output Short Circuit Current 3 . . . . . . . . . . . . . . . . . . . . . . . . 200 mA
Notes:
1. Minimum DC voltage on input or I/Os is –0.5 V. During voltage transitions, inputs or I/
Os may overshoot V_SS to –2.0 V for periods of up to 20 ns. See Figure 7, on page 66.
Maximum DC voltage on input or I/Os is V_CC + 0.5 V. During voltage transitions, input
or I/O pins may overshoot to V_CC + 2.0 V for periods up to 20 ns. See Figure 8, on page
66.
2. Minimum DC input voltage on pins A9, OE#, and ACC is –0.5 V. During voltage
transitions, A9, OE#, and ACC may overshoot V_SS to –2.0 V for periods of up to 20 ns.
See Figure 7, on page 66. Maximum DC input voltage on pin A9, OE#, and ACC is +12.5
V which may overshoot to +14.0V for periods up to 20 ns.
3. No more than one output may be shorted to ground at a time. Duration of the short
circuit should not be greater than one second.
4. Stresses above those listed under Absolute Maximum Ratings may cause permanent
damage to the device. This is a stress rating only; functional operation of the device at
these or any other conditions above those indicated in the operational sections of this
data sheet is not implied. Exposure of the device to absolute maximum rating conditions
for extended periods may affect device reliability.
+0.8 V
–0.5 V
–2.0 V
20 ns
20 ns
20 ns
V_CC
+2.0 V
V_CC
+0.5 V
2.0 V
20 ns
20 ns
20 ns
Figure 7. Maximum Negative
Overshoot Waveform
Figure 8. Maximum Positive
Overshoot Waveform
Operating Ranges
Industrial (I) Devices
Ambient Temperature (T_A) . . . . . . . . . . . . . . . . . . . . . . . . . –40°C to +85°C
Supply Voltages
V_CC . . . . . . . . . . . . . . . . . . . . . . . . . . +2.7 V to +3.6 V or +3.0V to 3.6V
Notes:
1. Operating ranges define those limits between which the functionality of the device is guaranteed.
66
S70GL01GN00 MirrorBit^TM Flash
S70GL01GN00_00_A1 June 1, 2005