S70GL01GN00 Datasheet, PDF (11/83 Pages) SPANSION – 3.0 Volt-only Page Mode Flash Memory featuring 110 nm MirrorBit™ Process Technology

Advance Information
Ordering Information
The ordering part number is formed by a valid combination of the following:
S70GL01GN00 F A I 00 0
PACKING TYPE
0 = Tray (standard; see note 1)
2 = 7” Tape and Reel
3 = 13” Tape and Reel
MODEL NUMBER (V_IO range, protection when WP# =V_IL)
01 = V_IO = V_CC = 2.7 to 3.6 V, highest address sector protected for both Flash-1
and Flash-2
02 = V_IO = V_CC = 2.7 to 3.6 V, lowest address sector protected for both Flash-1
and Flash-2
12 = V_IO = V_CC = 2.7 to 3.6 V, highest address sector protected for Flash1, lowest
address sector protected for Flash-2
TEMPERATURE RANGE
I
= Industrial (–40°C to +85°C)
PACKAGE MATERIALS SET
A = Standard
F = Pb-free
PACKAGE TYPE
F = Fortified Ball Grid Array, 1.0 mm pitch package
DEVICE NUMBER/DESCRIPTION
3.0 Volt-only, 1024 Megabit (2x32 M x 16-Bit/2x64 M x 8-Bit) Page-Mode Flash Memory
Manufactured on 110 nm MirrorBit^TM process technology
S70GL01GN00 Valid Ordering Part Numbers
1Gb
Package &
Temperature
Model
Number
Pack Type
(Note 1)
Comments
S70GL01GN00
FAI, FFI (Note 2)
01, 02, 12
0, 2, 3
Speed = 110 ns
Notes:
1. Type 0 is standard. Specify other options as required.BGAs can be packed in Types 0, 2, or 3.
2. BGA package Note 2marking omits leading S29 and packing type designator from ordering part number.
Valid Combinations
Valid Combinations list configurations planned to be supported in volume for this device.
Consult your local sales office to confirm availability of specific valid combinations and to
check on newly released combinations.
June 1, 2005 S70GL01GN00_00_A1
S70GL01GN00 MirrorBit^TM Flash
9