|
M16C62_N Datasheet, PDF (575/621 Pages) Renesas Technology Corp – 16-BIT SINGLE-CHIP MICROCOMPUTER M16C FAMILY | |||
|
◁ |
Standard Characteristics
Mitsubishi microcomputers
M16C / 62 Group
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
⢠Measurement conditions :
VCC = 3V, Ta = 25ËC, f(XIN) : square waveform input, single-chip mode
When access to ROM and RAM with one wait, f(XIN) = 2MHZ to 10MHZ, Division ratio : 1 to 1/16
⢠Register setting condition
XIN - XOUT drive capacity select bit = â1â (HIGH)
Main clock (XIN - XOUT) stop bit = â0â (On)
VCC = 3V
10.00
f(XIN) / 1
f(XIN) / 2
f(XIN) / 4
f(XIN) / 8
f(XIN) / 16
5.00
0
0
2.0
4.0
6.0
8.0
10.0
12.0
f(XIN) [MHz]
Note: Data described here are characteristic examples. The data values are not guaranteed.
Refer to section âElectrical characteristicsâ for rated values.
Figure 7.1.6. Standard characteristics of ICC-f(XIN) (VCC = 3V) (one-time PROM version)
⢠Measurement conditions :
VCC = 3V, Ta = 25ËC, f(XIN) : square waveform input, single-chip mode
When access to ROM and RAM with one wait, f(XIN) = 2MHZ to 10MHZ, Division ratio : 1 to 1/16
⢠Register setting condition
XIN - XOUT drive capacity select bit = â1â (HIGH)
Main clock (XIN - XOUT) stop bit = â0â (On)
VCC = 3V
10.00
f(XIN) / 1
f(XIN) / 2
f(XIN) / 4
f(XIN) / 8
f(XIN) / 16
5.00
0
0
2.0
4.0
6.0
8.0
10.0
12.0
f(XIN) [MHz]
Note: Data described here are characteristic examples. The data values are not guaranteed.
Refer to section âElectrical characteristicsâ for rated values.
Figure 7.1.7. Standard characteristics of ICC-f(XIN) (VCC = 3V) (mask ROM version)
560
|
▷ |