M16C62_N Datasheet, PDF (198/621 Pages) Renesas Technology Corp – 16-BIT SINGLE-CHIP MICROCOMPUTER M16C FAMILY

Electrical characteristics
Mitsubishi microcomputers
M16C / 62 Group
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
Table 1.26.2. Recommended operating conditions (referenced to VCC = 2.7V to 5.5V at Ta = – 20^oC
to 85^oC / – 40^oC to 85^oC(Note3) unless otherwise specified)
Symbol
Parameter
Vcc
AVcc
Vss
AVss
VIH
Supply voltage
Analog supply voltage
Supply voltage
Analog supply voltage
HIGH input ^{P31 to P37, P40 to P47, P50 to P57, P60 to P67,}
voltage ^{P72 to P77, P80 to P87, P90 to P97, P100 to P107,}
XIN, RESET, CNVSS, BYTE
P70 ,P71
P00 to P07, P10 to P17, P20 to P27, P30 (during single-chip mode)
P00 to P07, P10 to P17, P20 to P27, P30
(data input function during memory expansion and microprocessor modes)
LOW input P31 to P37, P40 to P47, P50 to P57, P60 to P67,
voltage P70 to P77, P80 to P87, P90 to P97, P100 to P107,
VIL
XIN, RESET, CNVSS, BYTE
P00 to P07, P10 to P17, P20 to P27, P30 (during single-chip mode)
P00 to P07, P10 to P17, P20 to P27, P30
(data input function during memory expansion and microprocessor modes)
I OH (peak)
I OH (avg)
HIGH peak output ^{P00 to P07, P10 to P17, P20 to P27,P30 to P37,}
current
P40 to P47, P50 to P57, P60 to P67,P72 to P77,
P80 to P84,P86,P87,P90 to P97,P100 to P107
HIGH average output _{P00 to P07, P10 to P17, P20 to P27,P30 to P37,}
current
P40 to P47, P50 to P57, P60 to P67,P72 to P77,
P80 to P84,P86,P87,P90 to P97,P100 to P107
LOW peak output
I OL (peak) current
P00 to P07, P10 to P17, P20 to P27,P30 to P37,
P40 to P47, P50 to P57, P60 to P67,P70 to P77,
P80 to P84,P86,P87,P90 to P97,P100 to P107
LOW average
I OL (avg) _{output current}
P00 to P07, P10 to P17, P20 to P27,P30 to P37,
P40 to P47, P50 to P57, P60 to P67,P70 to P77,
P80 to P84,P86,P87,P90 to P97,P100 to P107
f (XIN)
No wait
EPROM version,
One time PROM
version
Vcc=4.5V to 5.5V
Vcc=2.7V to 4.5V
Mask ROM version, ^{Vcc=4.2V to 5.5V}
Main clock input
Flash memory 5V
version (Note 5)
Vcc=2.7V to 4.2V
oscillation frequency
With wait
EPROM version,
One time PROM
version
Mask ROM version,
Vcc=4.5V to 5.5V
Vcc=2.7V to 4.5V
Vcc=4.2V to 5.5V
Flash memory 5V
version (Note 5)
Vcc=2.7V to 4.2V
f (XcIN) _{Subclock oscillation frequency}
Standard
Min Typ. Max. ^Unit
2.7
5.0
5.5
V
Vcc
V
0
V
0
V
0.8Vcc
0.8Vcc
0.8Vcc
0.5Vcc
Vcc
V
6.5
V
Vcc
V
Vcc
V
0
0.2Vcc V
0
0.2Vcc V
0
0.16Vcc V
-10.0
mA
-5.0
mA
10.0
mA
5.0
mA
0
16 MHz
0
6.95 X Vcc
-15.275
MHz
0
16 MHz
0
7.33 X Vcc
-14.791
MHz
0
16 MHz
0
5X Vcc
-6.5
MHz
0
16 MHz
0
4 X Vcc
-0.8
MHz
32.768
50
kHz
Note 1: The mean output current is the mean value within 100ms.
Note 2: The total IOL (peak) for ports P0, P1, P2, P86, P87, P9, and P10 must be 80mA max. The total IOH (peak) for ports P0, P1,
P2, P86, P87, P9, and P10 must be 80mA max. The total IOL (peak) for ports P3, P4, P5, P6, P7, and P80 to P84 must be
80mA max. The total IOH (peak) for ports P3, P4, P5, P6, P72 to P77, and P80 to P84 must be 80mA max.
Note 3: Specify a product of -40°C to 85°C to use it.
Note 4: Relationship between main clock oscillation frequency and supply voltage.
Main clock input oscillation frequency
(EPROM version, One-time PROM
version, No wait)
16.0
6.95 X VCC - 15.275MHZ
Main clock input oscillation frequency
(Mask ROM version, Flash memory 5V version,
No wait)
16.0
7.33 X VCC - 14.791MHZ
Main clock input oscillation frequency
(EPROM version, One-time PROM
version, With wait)
16.0
5 X VCC - 6.5MHZ
Main clock input oscillation frequency
(Mask ROM version, Flash memory 5V
version, With wait)
16.0
4 X VCC - 0.8MHZ
10.0
7.0
5.0
3.5
0.0
2.7
4.5
5.5
Supply voltage[V]
(BCLK: no division)
0.0
2.7
4.2
5.5
Supply voltage[V]
(BCLK: no division)
0.0
2.7
4.5
5.5
Supply voltage[V]
(BCLK: no division)
0.0
2.7
4.2
5.5
Supply voltage[V]
(BCLK: no division)
Note 5: Execute case without wait, program / erase of flash memory by VCC=4.2V to 5.5V and f(BCLK) ≤ 6.25 MHz. Execute case
with wait, program / erase of flash memory by VCC=4.2V to 5.5V and f(BCLK) ≤ 12.5 MHz.
183