M16C62_N Datasheet, PDF (242/621 Pages) Renesas Technology Corp – 16-BIT SINGLE-CHIP MICROCOMPUTER M16C FAMILY

t
Mitsubishi microcomputers
M16C / 62 Group
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
GZZ SH12 66B <82A0>
MITSUBISHI ELECTRIC SINGLE-CHIP 16-BIT
MICROCOMPUTER M30622MA-XXXGP
MASK ROM CONFIRMATION FORM
Mask ROM number
The ASCII code for the type No. can be written to EPROM addresses 0000016 to 0000F16 by specifying the
pseudo-instructions for the respective EPROM type shown in the following table at the beginning of the
assembler source program.
EPROM type
27C201
27C401
Code entered in
source program
.SECTION ASCIICODE, ROM DATA
.ORG 0C0000H
.BYTE ' M30622MA- '
.SECTION ASCIICODE, ROM DATA
.ORG 080000H
.BYTE ' M30622MA- '
Note: The ROM cannot be processed if the type No. written to the EPROM does not match the type No.
in the check sheet.
In the case of floppy disks
Mitsubishi processes the mask files generated by the mask file generation utilities out of those held on
the floppy disks you give in to us, and forms them into masks. Hence, we assume liability provided that
there is any discrepancy between the contents of these mask files and the ROM data to be burned into
products we produce. Check thoroughly the contents of the mask files you give in.
Prepare 3.5 inches 2HD(IBM format) floppy disks. And store only one mask file in a floppy disk.
Microcomputer type No. :
File code :
M30622MA-XXXFP
M30622MA-XXXGP
(hex)
Mask file name :
.MSK (alpha-numeric 8-digit)
2. Mark specification
The mark specification differs according to the type of package. After entering the mark specification on
the separate mark specification sheet (for each package), attach that sheet to this masking check sheet
for submission to Mitsubishi.
For the M30622MA-XXXFP, submit the 100P6S mark specification sheet. For the M30622MA-XXXGP,
submit the 100P6Q mark specification sheet.
3. Usage Conditions
For our reference when of testing our products, please reply to the following questions about the usage of
the products you ordered.
(1) Which kind of XIN-XOUT oscillation circuit is used?
Ceramic resonator
Quartz-crystal oscillator
External clock input
Other (
)
What frequency do you use?
f(XIN) =
MHZ
227