M16C62_N Datasheet, PDF (574/621 Pages) Renesas Technology Corp – 16-BIT SINGLE-CHIP MICROCOMPUTER M16C FAMILY

Standard Characteristics
Mitsubishi microcomputers
M16C / 62 Group
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
7.1.2 Standard characteristics of ICC-f(XIN)
The standard characteristics given in this section are examples of M30620EC-XXXFP. The contents of
these examples cannot be guaranteed. For standardized values, see “Electric characteristics”.
Figures 7.1.5 to 7.1.7 show the standard characteristics of ICC-f(XIN). Figure 7.1.7 is only mask ROM
version.
• Measurement conditions :
VCC = 5V, Ta = 25˚C, f(XIN) : square waveform input, single-chip mode
When access to ROM and RAM without wait, f(XIN) = 2MHZ to 16MHZ, Division ratio : 1 to 1/16
• Register setting condition
XIN - XOUT drive capacity select bit = “1” (HIGH)
Main clock (XIN - XOUT) stop bit = “0” (On)
VCC = 5V
30.00
25.00
20.00
f(XIN) / 1
f(XIN) / 2
f(XIN) / 4
f(XIN) / 8
f(XIN) / 16
15.00
10.00
5.00
5.0
10.0
15.0
20.0
f(XIN) [MHz]
Note: Data described here are characteristic examples. The data values are not guaranteed.
Refer to section “Electrical characteristics” for rated values.
Figure 7.1.5. Standard characteristics of ICC-f(XIN) (VCC = 5V)
559