English
Language : 

S128 Datasheet, PDF (39/107 Pages) Renesas Technology Corp – Microcontroller
◁
S128
2. Electrical Characteristics
Table 2.11 Operating and standby current (1) (2 of 2)
Conditions: VCC = AVCC0 = 1.6 to 5.5 V
Parameter
Symbol Typ*9
Test
Max Unit Conditions
Supply
current*1
Low-voltage
mode*3
Normal mode
All peripheral clock
disabled, while (1) code
executing from flash*5
ICLK = 4 MHz
ICC
1.5
-
mA *7
All peripheral clock
disabled, CoreMark code
executing from flash*5
ICLK = 4 MHz
1.4
-
All peripheral clock
enabled, while (1) code
executing from flash*5
ICLK = 4 MHz
2.3
-
*8
All peripheral clock
enabled, code executing
from flash*5
ICLK = 4 MHz
-
4.0
Sleep mode
All peripheral clock
disabled*5
ICLK = 4 MHz
0.9
-
*7
All peripheral clock
enabled*5
ICLK = 4 MHz
1.7
-
*8
Subosc-
Normal mode All peripheral clock
ICLK = 32.768 kHz ICC
5.9
-
μA *7
speed
disabled, while (1) code
mode*4
executing from flash*5
All peripheral clock
ICLK = 32.768 kHz
13.0
-
*8
enabled, while (1) code
executing from flash*5
All peripheral clock
enabled, code executing
from flash*5
ICLK = 32.768 kHz
128.3
163.7
(17.8)*10
Sleep mode
All peripheral clock
ICLK = 32.768 kHz
3.2
-
*7
disabled*5
All peripheral clock
ICLK = 32.768 kHz
10.0
-
*8
enabled*5
Note 1. Supply current values do not include output charge/discharge current from all pins. The values apply when
internal pull-up MOSs are in the off state.
Note 2. The clock source is HOCO.
Note 3. The clock source is MOCO.
Note 4. The clock source is the sub-clock oscillator.
Note 5. This does not include BGO operation.
Note 6. This is the increase for programming or erasure of the ROM or flash memory for data storage during program
execution.
Note 7. PCLKB and PCLKD are set to divided by 64.
Note 8. PCLKB and PCLKD are the same frequency as that of ICLK.
Note 9. VCC = 3.3 V.
Note 10. MOCO and DAC is stopped.
R01DS0309EU0100 Rev.1.00
Mar 10, 2017
Page 39 of 107
 ▷