 English |
|
|
|
|
|
|
|
| S128 Datasheet, PDF (22/107 Pages) Renesas Technology Corp – Microcontroller | |||
| |||
| ◁ |
S128
2. Electrical Characteristics
2. Electrical Characteristics
Unless otherwise specified, the electrical characteristics of the MCU are defined under the following conditions:
VCC*1 = AVCC0 = VCC_USB*2 = VCC_USB_LDO*2 = 1.6 to 5.5V, VREFH0 = 1.6 to AVCC0,
VSS = AVSS0 = VREFL0 = VSS_USB = 0 V, Ta = Topr
Note 1. The typical condition is set to VCC = 3.3V.
Note 2. When USBFS is not used.
Figure 2.1 shows the timing conditions.
For example P100
C
VOH = VCC Ã 0.7, VOL = VCC Ã 0.3
VIH = VCC Ã 0.7, VIL = VCC Ã 0.3
Load capacitance C = 30pF
Figure 2.1
Input or output timing measurement conditions
The measurement conditions of the timing specifications for each peripheral are recommended for the best peripheral
operation. However, make sure to adjust driving abilities for each pin to meet the conditions of your system.
Each function pin used for the same function must select the same drive ability. If the I/O drive ability of each function
pin is mixed, the A/C specification of each function is not guaranteed.
R01DS0309EU0100 Rev.1.00
Mar 10, 2017
Page 22 of 107
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese