S128 Datasheet, PDF (28/107 Pages) Renesas Technology Corp – Microcontroller

S128
2.2.4
I/O V_OH, V_OL, and Other Characteristics
2. Electrical Characteristics
Table 2.7
I/O V_OH, V_OL (1)
Conditions: VCC = AVCC0 = VCC_USB = VCC_USB_LDO = 4.0 to 5.5 V
Parameter
Output voltage IIC*^1, *²
Ports P408, P409*^2, *³
Ports P000 to P004,
P010 to P015, P500 to
P502
Low drive
Middle drive
Symbol
V_OL
V_OL
V_OH
V_OL
V_OH
V_OL
V_OH
V_OL
Ports P914, P915
V_OH
Other output pins*⁴
Low drive
Middle drive
V_OL
V_OH
V_OL
V_OH
V_OL
Min
Typ
-
-
-
-
VCC – 1.0 -
-
-
AVCC0 – -
0.8
-
-
AVCC0 – -
0.8
-
-
VCC_USB -
– 0.8
-
-
VCC – 0.8 -
-
-
VCC – 0.8 -
-
-
Max
0.4
0.6
-
1.0
-
0.8
-
0.8
-
0.8
-
0.8
-
0.8
Unit
V
Test conditions
I_OL = 3.0 mA
I_OL = 6.0 mA
I_OH = –20.0 mA
I_OL = 20 mA
I_OH = –2.0 mA
I_OL = 2.0 mA
I_OH = –4.0 mA
I_OL = 4.0 mA
I_OH = –2.0 mA
I_OL = 2.0 mA
I_OH = –2.0 mA
I_OL = 2.0 mA
I_OH = –4.0 mA
I_OL = 4.0 mA
Note 1. SCL0_A, SDA0_A, SCL0_B, SDA0_B, SCL0_C, SCL1_A, SDA1_A, SCL1_B, SDA1_B (total 9 pins).
Note 2. This is the value when middle driving ability is selected with the Port Drive Capability bit in the PmnPFS register.
Note 3. Based on characterization data, not tested in production.
Note 4. Except for Ports P200, P214, P215, which are input ports.
Table 2.8
I/O V_OH, V_OL (2)
Conditions: VCC = AVCC0 = VCC_USB = VCC_USB_LDO = 2.7 to 4.0 V
Parameter
Output voltage IIC*^1, *²
Ports P408, P409*^2, *³
Symbol
V_OL
V_OL
V_OH
V_OL
Ports P000 to P004, Low drive
V_OH
P010 to P015, P500 to
P502
V_OL
Middle drive V_OH
V_OL
Ports P914, P915
V_OH
Other output pins*⁴
Low drive
Middle drive
V_OL
V_OH
V_OL
V_OH
V_OL
Min
-
-
VCC – 1.0
Typ Max
-
0.4
-
0.6
-
-
-
-
1.0
AVCC0 – 0.5 -
-
-
-
0.5
AVCC0 – 0.5 -
-
-
-
0.5
VCC_USB – -
-
0.5
-
-
0.5
VCC – 0.5 -
-
-
-
0.5
VCC – 0.5 -
-
-
-
0.5
Unit
V
Test conditions
I_OL = 3.0 mA
I_OL = 6.0 mA
I_OH = –20.0 mA
VCC = 3.3 V
I_OL = 20 mA
VCC = 3.3 V
I_OH = –1.0 mA
I_OL = 1.0 mA
I_OH = –2.0 mA
I_OL = 2.0 mA
I_OH = –1.0 mA
I_OL = 1.0 mA
I_OH = –1.0 mA
I_OL = 1.0 mA
I_OH = –2.0 mA
I_OL = 2.0 mA
Note 1. SCL0_A, SDA0_A, SCL0_B, SDA0_B, SCL0_C, SCL1_A, SDA1_A, SCL1_B, SDA1_B (total 9 pins).
Note 2. This is the value when middle driving ability is selected with the Port Drive Capability bit in the PmnPFS register.
Note 3. Based on characterization data, not tested in production.
Note 4. Except for Ports P200, P214, P215, which are input ports.
R01DS0309EU0100 Rev.1.00
Mar 10, 2017
Page 28 of 107