MC68HC05C8A Datasheet, PDF (150/158 Pages) Motorola, Inc – Microcontrollers

MC68HSC05C8A
B.4 DC Electrical Characteristics
The data in 13.7 5.0-V DC Electrical Characteristics and 13.8 3.3-V
DC Electrical Characteristics applies to the MC68HSC05C8A with the
exceptions given here.
Characteristic⁽¹⁾
Symbol
Min
Typ Max Unit
Supply current (4.5–5.5 Vdc @ f_BUS = 4.0 MHz)
Run⁽²⁾
Wait⁽³⁾
Stop⁽⁴⁾
25°C
0°C to 70°C (Standard)
–40°C to 125°C (Standard)
—
7.00 11.0 mA
—
2.00 6.50 mA
I_DD
—
1
20 µA
—
—
40 µA
—
—
50 µA
Supply Current (2.4–3.6 Vdc @ f_BUS = 2.0 MHz)
Run⁽²⁾
Wait⁽³⁾
Stop⁽⁴⁾
25°C
0°C to 70°C (standard)
–40°C to 125°C (standard)
—
2.50 4.00 mA
—
1.00 2.00 mA
I_DD
—
1
8
µA
—
—
16 µA
—
—
20 µA
Input pullup current (V_DD = 4.5–5.5 V)
PB7–PB0 (with pullup)
I_In
175
385 750 µA
Input pullup current (V_DD = 2.4–3.6 V)
PB7–PB0 (with pullup)
I_In
50
160 350 µA
1. Typical values reflect measurements taken on average processed devices at the midpoint of voltage range, 25°C only.
2. Run (operating) I_DD measured using external square wave clock source; all I/O pins configured as inputs, Port B = V_DD,
all other inputs V_IL = 0.2 V, V_IH = V_DD–0.2 V; no DC loads; less than 50 pF on all outputs;
C_L = 20 pF on OSC2
3. Wait I_DD measured using external square wave clock source; all I/O pins configured as inputs,
Port B = V_DD, all other inputs V_IL = 0.2 V, V_IH = V_DD –0.2 V; no DC loads; less than 50 pF on all outputs;
C_L = 20 pF on OSC2. Wait I_DD is affected linearly by the OSC2 capacitance.
4. Stop I_DD measured with OSC1 = 0.2 V; all I/O pins configured as inputs, Port B = V_DD, all other inputs
V_IL = 0.2 V, V_IH = V_DD –0.2 V
Technical Data
150
MC68HC05C8A • MC68HCL05C8A • MC68HSC05C8A — Rev. 5.0
MC68HSC05C8A
MOTOROLA