|
MC68HC05C8A Datasheet, PDF (126/158 Pages) Motorola, Inc – Microcontrollers | |||
|
◁ |
Electrical Specifications
13.8 3.3-V DC Electrical Characteristics
Output voltage
ILoad = 10.0 µA
ILoad = â10.0 µA
Characteristic(1)
Symbol
Min
Typ(2)
VOL
â
â
VOH VDDâ0.1 â
Max
0.1
â
Unit
V
Output high voltage
(ILoad = â0.2 mA) PA7âPA0, PB7âPB0, PC6âPC0, TCMP
(ILoad = â0.4 mA) PD4âPD1
(ILoad = â1.5 mA) PC7
Output low voltage
(ILoad = 0.4 mA) PA7âPA0, PB7âPB0, PC6âPC0,
PD4âPD1, TCMP
(ILoad = 6 mA) PC7
Input high voltage
PA7âPA0, PB7âPB0, PC7âPC0, PD7,
PD5âPD0, TCAP, IRQ, RESET, OSC1
Input low voltage
PA7âPA0, PB7âPB0, PC7âPC0, PD7,
PD5âPD0, TCAP, IRQ, RESET, OSC1
Supply current (3.0â3.6 Vdc @ fBus = 1.0 MHz)
Run(3)
Wait(4)
Stop(5)
25°C
0°C to +70°C (standard)
â40°C to +125°C (standard)
I/O ports hi-z leakage current
PA7âPA0, PB7âPB0 (without pullup)
PC7âPC0, PD7, PD5âPD0
Input current
RESET, IRQ, OSC1, TCAP, PD7, PD5, PD0
Input pullup current(6)
PB7âPB0 (with pullup)
Capacitance
Ports (as input or output)
RESET, IRQ, OSC1, TCAP, PD7, PD5, PD0
VOH
VDDâ0.3
VDDâ0.3
â
â
â
â
V
VDDâ0.3 â
â
VOL
â
â
0.3
V
â
â
0.3
VIH
0.7ÃVDD â
VDD
V
VIL
VSS
â 0.2ÃVDD V
IDD
IOZ
IIn
IIn
COut
CIn
â
1.00
1.60 mA
â
500
900
µA
â
1
8
µA
â
â
16
µA
â
â
20
µA
â
â
±10
µA
â
â
±1
µA
75
175
350
µA
â
â
12
pF
â
â
8
1. VDD = 3.3 Vdc ± 0.3 Vdc, VSS = 0 Vdc, TA = â40°C to +125°C, unless otherwise noted.
2. Typical values reflect measurements taken on average processed devices at the midpoint of voltage range, 25°C only.
3. Run (operating) IDD measured using external square wave clock source; all I/O pins configured as inputs, Port B = VDD, all
other inputs VIL = 0.2 V, VIH = VDD â0.2 V; no DC loads; less than 50 pF on all outputs; CL = 20 pF on OSC2.
4. Wait IDD measured using external square wave clock source; all I/O pins configured as inputs, Port B = VDD, all other inputs
VIL = 0.2 V, VIH = VDD â0.2 V; no DC loads; less than 50 pF on all outputs; CL = 20 pF on OSC2. Wait IDD is affected linearly
by the OSC2 capacitance.
5. Stop IDD measured with OSC1 = 0.2 V; all I/O pins configured as inputs, Port B = VDD, all other inputs VIL = 0.2 V,
VIH = VDD â0.2 V.
6. Input pullup current measured with VIL = 0.2 V.
Technical Data
126
MC68HC05C8A ⢠MC68HCL05C8A ⢠MC68HSC05C8A â Rev. 5.0
Electrical Specifications
MOTOROLA
|
▷ |