MC68HC05C8A Datasheet, PDF (122/158 Pages) Motorola, Inc – Microcontrollers

Electrical Specifications
13.3 Maximum Ratings
Maximum ratings are the extreme limits to which the MCU can be
exposed without permanently damaging it.
The MCU contains circuitry to protect the inputs against damage from
high static voltages; however, do not apply voltages higher than those
shown in the table below. Keep V_In and V_Out within the range
V_SS ≤ (V_In or V_Out) ≤ V_DD. Connect unused inputs to the appropriate
voltage level, either V_SS or V_DD.
Rating
Supply voltage
Current drain per pin excluding V_DD and V_SS
IRQ pin only
Storage temperature range
Symbol
Value
Unit
V_DD
–0.3 to +7.0 V
I
25
mA
V_SS –0.3
V_In
to
V
2 x V_DD + 0.3
T_stg
–65 to +150 °C
NOTE:
This device is not guaranteed to operate properly at the maximum
ratings. Refer to 13.7 5.0-V DC Electrical Characteristics and
13.8 3.3-V DC Electrical Characteristics for guaranteed operating
conditions.
13.4 Operating Temperature Range
Characteristic
Operating temperature range⁽¹⁾
MC68HC05C8AP, FN, B, FB
MC68HSC05C8CP, CFN, CB, CFB
MC68HC05C8AVP, VN, VB, VFB
MC68HC05C8AMP, MFN, MB, MFB
1. P = Plastic dual in-line package (PDIP)
FN = Plastic-leaded chip carrier (PLCC)
B = Shrink dual in-line-package (SDIP)
FB = Quad flat pack (QFP)
Symbol
Value
Unit
T_L to T_H
0 to +70
T_A
–40 to +85 ^°C
–40 to +105
–40 to +125
Technical Data
122
MC68HC05C8A • MC68HCL05C8A • MC68HSC05C8A — Rev. 5.0
Electrical Specifications
MOTOROLA