TC11IB Datasheet, PDF (42/108 Pages) Infineon Technologies AG – 32-Bit Single-Chip Microcontroller

TC11IB
single data or burst transfers on both PCI and FPI bus. In addition, the bridge is able to
handle a direct data transfer between PCI bus and FPI bus utilizing it’s programmable
DMA channel. The DMA channel can only be activated by a FPI master. In order to work
as a PCI host bridge on the PCI bus, the variety of PCI transactions issued by the bridge
includes configuration transactions of type 0 and type 1 when acting as a PCI master.
Features
• PCI V2.2 compliant, 32 bit, 33 MHz
• Multifunction Device, Support both PCI Master/Host functions. These functions can be
activated by:
– TriCore
– Fast Ethernet
– DMA Channel
• Support Burst Transfer from PCI to ComDRAM, SDRAM and LMU.
• Support DMA Channel data transfers between PCI and FPI
• Loading of PCI Configuration Registers done by TriCore via FPI Bus access
• Support PCI Command
• Support Card-Bus.
• Power management
– according to PCI Bus Power Management Interface Specification V1.1
– Support Multiple PCI power management states D0, D1, D2, D3_cold
– PME#-Signalling from Fast Ethernet in D1, D2.
• PCI Reset
– All tristatable PCI outputs of the bridge are set to “Tristate” upon PCI Reset,
compliant to PCI Local Bus Specification V2.2
Data Sheet
38
V2.3, 2003-11