TLE9263-3QX Datasheet, PDF (40/198 Pages) Infineon Technologies AG – Dedicated Data Sheets are available for the different product variants

TLE9263-3QX
5.4
Partial Networking on CAN
5.4.1 CAN Partial Networking - Selective Wake Feature
The CAN Partial Networking feature can be activated for SBC Normal Mode, in SBC Sleep Mode and in SBC Stop
Mode. For SBC Sleep Mode the Partial Networking has to be activated before sending the SBC to Sleep Mode.
For SBC Stop Mode the Partial Networking has to be activated before going to SBC Stop Mode.
There are 2 detection mechanism available
• WUP (Wake-Up Pattern) this is a CAN wake, that reacts on the CAN dominant time, with 2 dominant signals
as defined in ISO WG11898-6.
• WUF (Wake-Up frame) this is the wake-up on a CAN frame that matches the programmed message filter
configured in the SBC via SPI.
The default baudrate is set to 500kBaud. Besides the commonly used baudrates of 125kBaud and 250kBaud,
other baudrates up to 1MBaud can be selected (see Chapter 16.5.2 and Chapter 16.5.3 for more details).
Data Sheet
40
Rev. 1.1, 2014-09-26