TLE9263-3QX Datasheet, PDF (112/198 Pages) Infineon Technologies AG – Dedicated Data Sheets are available for the different product variants

13.2
Electrical Characteristics
TLE9263-3QX
Interrupt Function
Table 31 Interrupt Output
V_S = 5.5 V to 28 V; T_j = -40 °C to +150 °C; SBC Normal Mode; all voltages with respect to ground; positive current
defined flowing into pin; unless otherwise specified.
Parameter
Symbol
Min.
Values
Typ. Max.
Unit Note /
Test Condition
Number
Interrupt Output; Pin INT
INT High Output Voltage V_INT,H 0.8 × –
V_CC1
INT Low Output Voltage V_INT,L –
–
INT Pulse Width
t_INT
–
100
INT Pulse Minimum Delay t_INTD
–
100
Time
–
V
0.2 × V
V_CC1
–
µs
–
µs
1)_{IINT = -1 mA;}
INT = OFF
1)_{IINT = 1 mA;}
INT = ON
2)
2) _between
consecutive pulses
P_13.2.1
P_13.2.2
P_13.2.3
P_13.2.4
Configuration Select; Pin INT
Config Pull-down
Resistance
R_CFG
–
250
–
kΩ
V_INT = 5 V
Config Select Filter Time t_{CFG_F} –
7
–
µs
2)
1) Output Voltage Value also determines device configuration during SBC Init Mode
2) Not subject to production test, tolerance defined by internal oscillator tolerance.
P_13.2.5
P_13.2.6
Data Sheet
112
Rev. 1.1, 2014-09-26