TLE9263-3QX Datasheet, PDF (19/198 Pages) Infineon Technologies AG – Dedicated Data Sheets are available for the different product variants

TLE9263-3QX
General Product Characteristics
Table 4 Current Consumption (cont’d)
Current consumption values are specified at Tj = 25°C, VS = 13.5V, all outputs open (unless otherwise specified)
Parameter
Symbol
Values
Unit Note / Test Condition Number
Current consumption per LIN I_LIN,dom
module, dominant state
Min.
–
Current consumption per LIN I_LIN,RcvOnly –
module, Receive Only Mode
Current consumption for
WK1..3 wake capability
(all wake inputs)
Current consumption for
WK1..3 wake capability
(all wake inputs)
I_Wake,WKx,25 –
I_Wake,WKx,85 –
Current consumption per LIN I_Wake,LIN,25 –
module wake capability
Current consumption per LIN I_Wake,LIN,85 –
module wake capability
Current consumption for CAN I_Wake,CAN,25 –
wake capability
(tsilence expired)
Current consumption for CAN I_Wake,CAN,85 –
wake capability
(tsilence expired)
Typ.
1.0
0.2
0.2
0.5
0.2
0.5
4.5
5.5
Max.
1.5 mA
0.5 mA
2
µA
3
µA
2
µA
3
µA
6
µA
7
µA
3)_{SBC Normal/Stop P_4.4.11}
Mode; LIN Normal
Mode; VTXDLIN =
GND;
no RL on LIN
3)_{SBC Normal/Stop P_4.4.12}
Mode; LIN Receive
Only Mode; VTXDLIN
= VCC1; no RL on LIN
5)6)7) _{SBC Sleep Mode; P_4.4.13}
WK1..3 wake capable
(all WKx enabled);
LIN, CAN = OFF
3)5)6)7)_{SBC Sleep}
P_4.4.14
Mode; T_j = 85°C;
WK1..3 wake capable;
(all WKx enabled);
LIN, CAN = OFF
5)_{SBC Sleep Mode; P_4.4.15}
LIN wake capable;
WK1..3, CAN = OFF
3)5)_{SBC Sleep Mode; P_4.4.16}
T_j = 85°C;
LIN wake capable;
WK1..3, CAN = OFF
2)5)_{SBC Sleep Mode; P_4.4.17}
CAN wake capable;
WK1..3, LIN = OFF
2)3)5)_{SBC Sleep Mode; P_4.4.18}
T_j = 85°C;
CAN wake capable;
WK1..3, LIN = OFF
VCC2 Normal Mode current I_Normal,VCC2 –
consumption
Current consumption for
VCC2 in SBC Sleep Mode
I_{Sleep,VCC2,25} –
Current consumption for
VCC2 in SBC Sleep Mode
I_{Sleep,VCC2,85} –
2.5
3.5
mA V_S = 5.5 V to 28 V; P_4.4.32
T_j = -40 °C to +150 °C;
VCC2 = ON (no load)
25
35
µA ¹⁾⁵⁾SBC Sleep Mode; P_4.4.19
VCC2 = ON (no load);
LIN, CAN,
WK1..3 = OFF
30
40
µA ¹⁾³⁾⁵⁾SBC Sleep Mode; P_4.4.20
T_j = 85°C; VCC2 = ON
(no load); LIN, CAN,
WK1..3 = OFF
Data Sheet
19
Rev. 1.1, 2014-09-26