TLE9263-3QX Datasheet, PDF (101/198 Pages) Infineon Technologies AG – Dedicated Data Sheets are available for the different product variants

TLE9263-3QX
LIN Transceiver
Table 26 Electrical Characteristics (cont’d)
V_SHS = 5.5 V to 18 V, T_j = -40 °C to +150 °C, RL = 500 Ω, all voltages with respect to ground, positive current
flowing into pin (unless otherwise specified)
Parameter
Symbol
Values
Unit Note / Test Condition
Number
Duty Cycle D1
D1
(For worst case at 20 kbit/s)
LIN 2.2 Normal Slope
Min. Typ. Max.
0.396 –
–
Duty Cycle D2
D2
(for worst case at 20 kbit/s)
LIN 2.2 Normal Slope
–
–
0.581
Duty Cycle D3
D3
(for worst case at 10.4 kbit/s)
SAE J2602 Low Slope
0.417 –
–
Duty Cycle D4
D4
(for worst case at 10.4 kbit/s)
SAE J2602 Low Slope
–
–
0.590
3) _{THRec(max) = 0.744 ×}
P_11.3.31
V_SHS;
TH_Dom(max) = 0.581 × V_SHS;
V_SHS = 7.0 … 18 V;
t_bit = 50 µs;
D1 = t_{bus_rec(min)}/2 t_bit;
LIN 2.2 Param 27
3)_{THRec(min.) = 0.422 ×}
P_11.3.32
V_SHS;
TH_Dom(min.) = 0.284 × V_SHS;
V_SHS = 7.6 … 18 V;
t_bit = 50 µs;
D2 = t_{bus_rec(max)}/2 t_bit;
LIN 2.2 Param 28
3)_{THRec(max) = 0.778 × VSHS P_11.3.33}
TH_Dom(max) = 0.616 × V_SHS;
V_SHS = 7.0 … 18 V;
t_bit = 96 µs;
D3 = t_{bus_rec(min)}/2 t_bit;
LIN 2.2 Param 29
3)_{THRec(min.) = 0.389 × P_11.3.34}
V_SHS;
THDom(min.) = 0.251 ×
V_SHS;
V_SHS = 7.6 … 18 V;
t_bit = 96 µs;
D4 = tbus_rec(max)/2 tbit;
LIN 2.2 Param 30
1) Not subject to production test, specified by design.
2) Not subject to production test, tolerance defined by internal oscillator tolerance
3) Bus load conditions concerning LIN Specification 2.2 C_LIN, R_LIN = 1 nF, 1 kΩ / 6.8 nF, 660 Ω/ 10 nF, 500 Ω
Data Sheet
101
Rev. 1.1, 2014-09-26