TLE9263-3QX Datasheet, PDF (115/198 Pages) Infineon Technologies AG – Dedicated Data Sheets are available for the different product variants

14.2
Electrical Characteristics
TLE9263-3QX
Fail Outputs
Table 32 Interrupt Output
V_SHS = 5.5 V to 28 V; T_j = -40 °C to +150 °C; SBC Normal Mode; all voltages with respect to ground; positive current
defined flowing into pin; unless otherwise specified.¹⁾
Parameter
Symbol
Min.
Values
Typ. Max.
Unit Note /
Test Condition
Number
Pin FO1
FO1 low output voltage
V_FO,L1
–
–
(active)
1.0
V
I_FO = 4mA
P_14.2.1
FO1 high output current I_FO,H
0
–
(inactive)
2
µA
V_FO = 28V
P_14.2.2
Pin FO2
FO2 side indicator
frequency
f_FO2SI
1.00 1.25
1.50
Hz
3)
FO2 side indicator duty
d_FO2SI
–
cycle
50
–
%
3)
Pin FO3/TEST²⁾
P_14.2.3
P_14.2.4
Pull-up Resistance at pin R_TEST
2.5
5
FO3/TEST
10
kΩ
V_TEST =0V;
SBC Init Mode
P_14.2.5
TEST Input Filter Time
t_TEST
–
FO3 pulsed
light frequency
f_FO3PL
80
64
–
µs
3)
100
120
Hz
3)
P_14.2.6
P_14.2.7
FO3 pulsed
light duty cycle
d_FO3PL
–
20
–
%
3)4)_{default setting}
P_14.2.8
Alternate FO2...3
Electrical Characteristics: GPIO
GPIO low-side output
V_GPIOL,L1 –
–
voltage (active)
GPIO low-side output
V_GPIOL,L2 –
–
voltage (active)
1
V
I_GPIO = 10mA
5
mV
5)_{IGPIO = 50µA}
P_14.2.9
P_14.2.17
GPIO high-side output
voltage (active)
GPIO high-side output
voltage (active)
GPIO input threshold
voltage
GPIO input threshold
hysteresis
V_GPIOH,H1 VSHS-1 –
V_GPIOH,H2 VSHS-5 –
V_GPIOI,th 1.5
2.5
V_GPIOI,hys 100
400
–
V
I_GPO = -10mA
P_14.2.10
–
mV
5)_{IGPO = -50µA}
P_14.2.18
3.5
V
6) _{hysteresis included P_14.2.11}
700
mV
5)
P_14.2.12
GPIO low-side current
I_GPIOL,max 10
–
limitation
30
mA V_GPIO = 28V
P_14.2.13
GPIO high-side current
I_GPIOH,max -45
–
limitation
-10
mA V_GPIO = 0V
P_14.2.14
1) The FOx drivers are supplied via VS. However, the GPIO HS switches (FO2, FO3/TEST) are supplied by VSHS
Data Sheet
115
Rev. 1.1, 2014-09-26