|
GMS81C5108 Datasheet, PDF (30/102 Pages) Hynix Semiconductor – HYNIX SEMICONDUCTOR INC. 8-BIT SINGLE-CHIP MICROCONTROLLERS | |||
|
◁ |
GMS81C5108
8.4 Addressing Mode
The GMS81C5108 uses six addressing modes;
⢠Register addressing
⢠Immediate addressing
⢠Direct page addressing
⢠Absolute addressing
⢠Indexed addressing
⢠Register-indirect addressing
(1) Register Addressing
Register addressing accesses the A, X, Y, C and PSW.
(2) Immediate Addressing â #imm
In this mode, second byte (operand) is accessed as a data
immediately.
Example:
0435
ADC #35H
MEMORY
04
A+35H+C â A
35
When G-flag is 1, then RAM address is defined by 16-bit
address which is composed of 8-bit RAM paging register
(RPR) and 8-bit immediate data.
Example: G=1, RPR=01H
E45535 LDM 35H,#55H
0135H
data
~~
Â
0F100H
E4
0F101H
55
0F102H
35
data â 55H
~~
Â
(3) Direct Page Addressing â dp
In this mode, a address is specified within direct page.
Example; G=0
C535
LDA 35H
;A âRAM[35H]
35H
data
~~
0E550H
C5
0E551H
35
Â
~~ Â data â A
(4) Absolute Addressing â !abs
Absolute addressing sets corresponding memory data to
Data, i.e. second byte (Operand I) of command becomes
lower level address and third byte (Operand II) becomes
upper level address.
With 3 bytes command, it is possible to access to whole
memory area.
ADC, AND, CMP, CMPX, CMPY, EOR, LDA, LDX,
LDY, OR, SBC, STA, STX, STY
Example;
0735F0 ADC !0F035H
;A âROM[0F035H]
0F035H
data
~~
0F100H
07
0F101H
35
0F102H
F0
Â
~~ Â
A+data+C â A
address: 0F035
JUNE 2001 Ver 1.0
27
|
▷ |