MB86R01 Datasheet, PDF (7/89 Pages) Fujitsu Component Limited. – MB86R01 DATA SHEET

MB86R01 DATA SHEET
1. Outline
MB86R01 is LSI product for the graphics applications with ARM Limited's CPU ARM926EJ-S and
Fujitsu's GDC MB86296 as its core. This product contains peripheral I/O resources, such as in-vehicle
LAN, HDD, and USB; therefore only a single chip of MB86R01 controls main graphics application system
which usually requires 2 chips (CPU and GDC.)
2. Feature
• CMOS 90nm technology
• Package: PBGA484
• Power-supply voltage: (IO: 3.3 ± 0.3V, core: 1.2 ± 0.1V, DDR2: 1.8 ± 0.1V)
• Operation frequency: 333MHz (CPU), 83MHz (AHB), 41.5MHz (APB)
• CPU core
• ARM926EJ-S
• 16KB instruction cache/16KB data cache
• 16KB ITCM/16KB DTCM
• ETM9CS Single and JTAG ICE interface
• Java acceleration (Jazelle technology)
• Bus architecture
• Multi-layer AHB bus architecture
• Interrupt
• Built-in SRAM
• Clock/Reset control function
• Remap/Boot control function
• 16 bit external bus interface with decoding engine
• 32 bit DDR2 memory interface (target: 166MHz: 333Mbps)
• Graphics display controller
• 2D/3D rendering engine of Fujitsu MB86296
• RGB66 video output × 1ch (extensible to RGB888 with using option I/O)
• ITU RBT-656 video capture × 1ch (extensible to RGB666 with using option I/O)
• USB 2.0 host (HS/FS protocols) × 1ch
• IDE66 (ATA/ATAPI-5) × 1ch
• SD memory interface (SDIO/CPRM: unsupported) × 1ch
• 10 bit A/D converter (1MS/s) × 2ch
• I²C (I/O voltage: 3.3V) × 2ch
• UART × 3ch (extensible up to 6ch with using option I/O)
• 32/16 bit timer × 2ch
• DMAC × 8ch
Option I/O (with pin multiplex)
• RGB666 video output is extensible to 2ch
• Video capture is extensible to 2ch
• MediaLB (MOST50) × 1ch is addable
• CAN (I/O voltage: 3.3V) × 2ch is addable
• USB 2.0 function (HS/FS protocols) is switchable (USB 2.0 function and USB 2.0 host are accessed
exclusively)
• GPIO is addable up to 24
• SPI × 1ch is addable
• PWM × 2ch is addable
FUJITSU MICROELECTRONICS
1
PROPRIETARY AND CONFIDENTIAL