MB86R01 Datasheet, PDF (46/89 Pages) Fujitsu Component Limited. – MB86R01 DATA SHEET

MB86R01 DATA SHEET
8.4. DC Characteristics
8.4.1. 3.3V Standard CMOS I/O
Table 8-7 shows 3.3V standard CMOS I/O DC characteristics.
Table 8-7 Standard CMOS I/O DC Characteristics
Parameter Symbol
Measurement condition: VDDE = 3.3 ±0.3V, VSS = 0V, T_J = -40 to 125°C
Condition
Min.
Rating
Typ.
Unit
Max.
H level input voltage VIH
2.0
–
VDDE + 0.3 V
L level input voltage VIL
-0.3
–
0.8
V
H level output
voltage
VOH IOH = -100μA
VDDE - 0.2
–
VDDE
V
L level output
voltage
VOL IOL = 100μA
0
–
0.2
V
H level output V-I
characteristic
L level output V-I
characteristic
Driving capability 1 IOH = 4mA
– _{Driving capability 2 IOH = 6mA}
–
Driving capability 3 IOH = 8mA See Figure 8-4, Figure 8-5, and Figure 8-6
Driving capability 1 IOL = 4mA ^{characteristics}
– Driving capability 2 IOL = 6mA
–
Driving capability 3 IOL = 8mA
Input leakage
current
IL
–
–
±4
μA
Driving capabilities 1 to 3 in the table above indicate the following external pins:
Driving capability 1: TDO, MEM_EA[24:1], MEM_ED[15:0], MEM_RDY, MEM_XCS0,
MEM_XCS2, MEM_XCS4, MEM_XRD, MEM_XWR0, MEM_XWR1
Driving capability 2: VINHSYNC0, VINVSYNC0, I2S_ECLK2, I2S_SCK2,
I2S_SDO2,I2S_WS2, IDE_DD[15:0], IDE_DINTRQ, IDE_XCBLID,
IDE_XDASP, PWM_O0, PWM_O1, VIN10-7, VINFID1, DOUTB1[7:2],
DOUTG1[7:2], DOUTR1[7:2], GV1, HSYNC0, HSYNC1, SD_CMD,
SD_DAT[3:0], TRACECLK, TRACEDATA[3:0], VIN0[7:0], VSYNC0,
VSYNC1, XSRST, DE0, DE1, DOUTB0[7:2], DOUTG0[7:2],
DOUTR0[7:2], GV0, IDE_CSEL, IDE_DA[2:0], IDE_XDCS[1:0],
IDE_XDDMACK, IDE_XDIOR, IDE_XDIOW, IDE_XDRESET, RTCK,
SD_CLK, TRACECTL, UART_SOUT[2:0], UART_XRTS0, USB_PRTPWR
Driving capability 3: DCLKO[1:0]
FUJITSU MICROELECTRONICS
40
PROPRIETARY AND CONFIDENTIAL