MB86R01 Datasheet, PDF (3/89 Pages) Fujitsu Component Limited. – MB86R01 DATA SHEET

MB86R01 DATA SHEET
Revision History
Date
2007/07/12
2007/08/20
2007/11/09
2008/02/07
Ver.
Contents
1.0 Newly issued
1.1 8.3.1. Recommended Power On/Off Sequence
• Revised the last line of description (PLL reference clock part)
8.4.3. ADC
• Revised value of table 8-16
• Revised and deleted descriptive content of note
• Revised footnote (*2) of table 8-17
8.4.4. I²C Bus Fast Mode I/O
• Revised table 8-18 and footnote
• Deleted footnote (*3)
8.5.9. I²C Bus Timing
• Revised footnote (*2) of table 8-37
8.5.12. MLB Signal Timing
• Revised MLB to MediaLB
• Revised footnote of table 8-42, 8-45
1.2 4. Function list
• Revised contents of the list
6. Pin assignment
• Revised figures in 1-8/1-9 pages
• Added "top view" statement
7.1. Pin Multiplex
• Revised description of note
• Added mode setting description to pin multiplex group #1 ~ #5
• Revised table of pin multiplex group #2 and #4
7.2.4. USB 2.0 Host/Function related pin
• Revised description of USB_EXT12K pin
7.2.5. External interrupt controller related pin
• Revised title
7.2.12. A/D converter related pin
• Revised pin name: AD_AVD0 → AD_AVD, AD_AVS1 → AD_AVS
7.2.24. Unused pin
• Added this section
7.2.25. Unused pin with pin multiplex function in the duplex case
• Added this section
8.4.2. DDR2SDRAM IF I/O (SSTL_18)
• Revised table 8-12
8.5.1. Memory Controller Signal Timing
• Revised table 8-21
• Revised figure 8-8 and 8-9
• Added figure 8-10, 8-11, and 8-12
8.5.6.2. Input Signal
• Revised figure 8-23
1.3 6. Pin assignment
• Revised figure and table
7.2.2. IDE66 related pin
• Revised type
• Revised status pin after reset
7.2.3. SD memory controller related pin
• Unified SD_DAT[0] and SD_DAT[3:1]
7.2.7. CAN related pin
• Revised type
FUJITSU MICROELECTRONICS
ii
PROPRIETARY AND CONFIDENTIAL