MB86R01 Datasheet, PDF (43/89 Pages) Fujitsu Component Limited. – MB86R01 DATA SHEET

MB86R01 DATA SHEET
8.2. Recommended Operating Conditions
Table 8-4 3.3V Standard CMOS I/O Recommended Operating Conditions
Parameter
Symbol
Min.
Rating
Typ.
Power supply voltage
VDDE
3.0
3.3
VDDI, PLLVDD
1.1
1.2
Input voltage
(High level)
3.3V CMOS
VIH
2.0
–
Input voltage
(Low level)
3.3V CMOS
VIL
-0.3
–
Operating ambient temperature T_A
-40
–
Junction temperature
T_J
-40
–
Unit
Max.
3.6
1.3
V
VDDE + 0.3 V
0.8
V
85
°C
125
°C
Table 8-5 SSTL_18 Recommended Operating Conditions
Parameter
Symbol
Min.
Typ.
Max.
Unit
Power supply voltage ^{VDE (DDRVDE)}
1.7
VDDI
1.10
1.8
1.9
V
1.20
1.30
V
Junction temperature T_J
-40
–
125
°C
The recommended operating conditions for the standard SSTL_18 (excerpted from JESD8-15a).
Table 8-6 USB2.0 Recommended Operating Conditions
Parameter
Symbol
Min.
USB_AVDF1
3.0
USB_AVDB
Supply voltage
USB_AVDF2
1.1
USB_AVDP
1.1
Junction temperature T_J
-40
Clock to be input to USB_CRYCLK48 should meet followings:
• 48MHz±100ppm clock
• 100ps or less jitter
Value
Typ.
3.3
1.2
1.2
–
Unit
Max.
3.6
V
1.3
V
1.3
V
125
°C
Note:
The recommended operating conditions are primarily intended to assure the normal operation of
semiconductor device. The values of electrical characteristics are guaranteed under the requirements
above, so use the product accordingly. Using the product without observing the conditions may affect
the product's reliability.
Performance of this product is not guaranteed using under the unspecified conditions and unspecified
combination of logic. Be sure to contact Fujitsu when using the product under such conditions.
FUJITSU MICROELECTRONICS
37
PROPRIETARY AND CONFIDENTIAL