MB86604L Datasheet, PDF (46/56 Pages) Fujitsu Component Limited. – SCSI-II Protocol Controller (with single-ended driver/receiver)

MB86604L
(2) Discrete commands
No
Command code
Operand (for program)
Command name
9 08H 0 0 0 0 1 0 0 0
—
Select
10 09H 0 0 0 0 1 0 0 1
—
Select with ATN
11 0AH 0 0 0 0 1 0 1 0
—
Set ATN
12 0BH 0 0 0 0 1 0 1 1
—
Reset ATN
13 0CH 0 0 0 0 1 1 0 0
—
Set ACK
14 0DH 0 0 0 0 1 1 0 1
—
Reset ACK
15 10H 0 0 0 1 0 0 0 0
—
Send Data from MPU
16 11H 0 0 0 1 0 0 0 1
—
Send Data from DMA
17 12H 0 0 0 1 0 0 1 0
—
Receive Data to MPU
18 13H 0 0 0 1 0 0 1 1
—
Receive Data to DMA
19 14H 0 0 0 1 0 1 0 0
—
Send DATA from MPU Padding
20 15H 0 0 0 1 0 1 0 1
—
Send DATA from DMA Padding
21 16H 0 0 0 1 0 1 1 0
—
Receive Data to MPU Padding
22 17H 0 0 0 1 0 1 1 1
—
Receive Data to DMA Padding
23 18H 0 0 0 1 1 0 0 0 Address of MSG sent
Send 1-MSG
24 19H 0 0 0 1 1 0 0 1 Address of MSG sent
Send 1-MSG with ATN
25 1AH 0 0 0 1 1 0 1 0 SAVE address of MSG Receive MSG
26 1BH 0 0 0 1 1 0 1 1 Address of CMD sent
Send CMD
27 1CH 0 0 0 1 1 1 0 0 SAVE address of STATUS Receive STATUS
46