MB86604L Datasheet, PDF (1/56 Pages) Fujitsu Component Limited. – SCSI-II Protocol Controller (with single-ended driver/receiver)

FUJITSU SEMICONDUCTOR
DATA SHEET
DS04-22415-1E
ASSP Communication Control
CMOS
SCSI-II Protocol Controller
(with single-ended driver/receiver)
MB86604L
s DESCRIPTION
The Fujitsu MB86604L is a single-ended transmission type SCSI-II Protocol Controller (SPC) with a single-ended
driver/receiver. The MB86604L facilitates interface control between small/medium host computer and peripheral
devices (such as a hard disk and printer). The specifications conform to the SCSI-II Standard.
The MB86604L supports high-speed synchronous transfer, the MPU/DMA independent system data bus, and
user programmable command set to enable configuration of high-performance systems.
It can also have the phase-to-phase sequence control function to reduce the program overhead of the host MPU.
The MB86604L incorporate with a single-ended type SCSI driver/receiver which can drive 48 mA of large-current,
and so, the device can be directly connected with the SCSI bus.
The device can operate with +5 V single-power supply and in up to 40 MHz clock frequency. As for package, a
100-pin plastic small quad flat package is available.
s FEATURES
SCSI Bus Interface:
• Conforming to the SCSI-II standard
• Operatable as Initiator and target
s PACKAGE
100 pin, Plastic LQFP
(Continued)
(FPT-100P-M05)