English
Language : 

MC68HC705KJ1 Datasheet, PDF (88/108 Pages) Motorola, Inc – HCMOS Microcontroller Unit
◁
Electrical Specifications
10.6 3.3-V DC Electrical Characteristics
Characteristic(1)
Symbol
Min
Typ(2)
Max
Unit
Output high voltage
(ILoad = –0.8 mA) PA4–PA7
(ILoad = –1.5 mA) PA0–PA3, PB2–PB3
Output low voltage
(ILoad = 5.0 mA) PA4–PA7
(ILoad = 3.5 mA) PA0–PA3, PB2–PB3
Input high voltage
PA0–PA7, PB2–PB3, IRQ/VPP, RESET, OSC1
Input low voltage
PA0–PA7, PB2–PB3, IRQ/VPP, RESET, OSC1
Supply current (fOP = 1.0 MHz; fOSC = 2.0 MHz)
Run mode(3)
Wait mode(4)
Stop mode(5)
Supply current (fOP = 2.1 MHz; fOSC = 4.2 MHz)
Run mode(3)
Wait mode(4)
Stop mode(5)
I/O ports hi-z leakage current
PA0–PA7, PB2–PB3 (without individual pulldown activated)
Input pulldown current
PA0–PA7, PB2–PB3 (with individual pulldown activated)
Input pullup current
RESET
Input current(6)
RESET, IRQ/VPP, OSC1
Capacitance
Ports (as inputs or outputs)
RESET, IRQ/VPP, OSC1, OSC2
Crystal/ceramic resonator oscillator mode internal resistor
OSC1 to OSC2(7)
VOH
VDD –0.3
—
VDD –0.3
—
—
V
—
VOL
—
—
—
—
VIH
0.7 × VDD
—
0.5
V
0.5
VDD
V
VIL
VSS
—
0.2 × VDD V
IDD
—
—
1.2
2.5
mA
0.3
0.8
mA
—
0.1
5.0
µA
IDD
—
—
1.4
3.0
mA
0.3
1.0
mA
—
0.1
5.0
µA
IIL
—
0.1
±1
µA
IIL
12
30
100
µA
IIL
–10
–25
–45
µA
IIn
—
0.1
±1
µA
COut
—
—
12
pF
CIn
—
—
8
ROSC
1.0
2.0
3.0
MΩ
1. VDD = 3.3 Vdc ± 10%, VSS = 0 Vdc, TA = –40°C to +85°C, unless otherwise noted.
2. Typical values at midpoint of voltage range, 25°C only
3. Run mode IDD is measured using external square wave clock source; all inputs 0.2 V from rail; no dc loads; less than 50 pF
on all outputs; CL = 20 pF on OSC2.
4. Wait mode IDD: only timer system active. Wait mode is affected linearly by OSC2 capacitance. Wait mode is measured
with all ports configured as inputs; VIL = 0.2 V; VIH = VDD – 0.2 V. Wait mode IDD is measured using external square wave
clock source; all inputs 0.2 V from rail; no dc loads; less than 50 pF on all outputs; CL = 20 pF on OSC2.
5. Stop mode IDD is measured with OSC1 = VSS. Stop mode IDD is measured with all ports configured as inputs; VIL = 0.2 V;
VIH = VDD – 0.2 V.
6. Only input high current rated to +1 µA on RESET.
7. The ROSC value selected for RC oscillator versions of this device is unspecified.
MC68HC705KJ1 • MC68HRC705KJ1 • MC68HLC705KJ1 Data Sheet, Rev. 4.1
88
Freescale Semiconductor
 ▷