|
MC68HC05C8A Datasheet, PDF (87/116 Pages) Motorola, Inc – Microcontrollers | |||
|
◁ |
13.6 5.0-V DC Electrical Characteristics
5.0-V DC Electrical Characteristics
Characteristic(1)
Output voltage
ILoad = 10.0 µA
ILoad = â10.0 µA
Output high voltage
(ILoad = â0.8 mA) PA7âPA0, PB7âPB0, PC6âPC0, TCMP
(ILoad = â1.6 mA) PD4âPD1
(ILoad = â5.0 mA) PC7
Output low voltage
(ILoad = 1.6 mA) PA7âPA0, PB7âPB0, PC6âPC0,
PD4âPD1, TCMP
(ILoad = 10 mA) PC7
Input high voltage
PA7âPA0, PB7âPB0, PC7âPC0, PD7,
PD5âPD0, TCAP, IRQ, RESET, OSC1
Input low voltage
PA7âPA0, PB7âPB0, PC7âPC0, PD7,
PD5âPD0, TCAP, IRQ, RESET, OSC1
Supply current (4.5â5.5 Vdc @ fBus = 2.1 MHz)
Run(3)
Wait(4)
Stop(5)
25°C
0°C to 70°C (standard)
â40°C to +125°C (standard)
I/O ports hi-z leakage current
PA7âPA0, PB7âPB0 (without pullup)
PC7âPC0, PD7, PD5âPD0
Input current
RESET, IRQ, OSC1, TCAP, PD7, PD5âPD0
Input pullup current(6)
PB7âPB0 (with pullup)
Symbol
Min
Typ(2)
VOL
â
â
VOH
VDDâ0.1
â
VOH
VDDâ0.8
â
VDDâ0.8
â
VDDâ0.8
â
Max
0.1
â
â
â
â
Unit
V
V
VOL
â
â
0.4
V
â
â
0.4
VIH
0.7ÃVDD
â
VDD
V
VIL
VSS
â
0.2ÃVDD
V
â
3.50
5.25
mA
â
1.00
3.25
mA
IDD
â
1
20
µA
â
â
40
µA
â
â
50
µA
IOZ
â
â
±10
µA
IIn
â
â
±1
µA
IIn
175
385
750
µA
Capacitance
Ports (as input or output)
RESET, IRQ, OSC1, TCAP, PD7, PD5, PD0
COut
â
â
12
pF
CIn
â
â
8
1. VDD = 5.0 Vdc ± 10%, VSS = 0 Vdc, TA = â40°C to +125°C, unless otherwise noted.
2. Typical values reflect measurements taken on average processed devices at the midpoint of voltage range, 25°C only.
3. Run (operating) IDD measured using external square wave clock source; all I/O pins configured as inputs, Port B = VDD, all
other inputs VIL = 0.2 V, VIH = VDDâ0.2 V; no DC loads; less than 50 pF on all outputs; CL = 20 pF on OSC2.
4. Wait IDD measured using external square wave clock source; all I/O pins configured as inputs, Port B = VDD, all other inputs
VIL = 0.2 V, VIH = VDDâ0.2 V; no DC loads; less than 50 pF on all outputs; CL = 20 pF on OSC2. Wait IDD is affected linearly
by the OSC2 capacitance.
5. Stop IDD measured with OSC1 = 0.2 V; all I/O pins configured as inputs, Port B = VDD, all other inputs VIL = 0.2 V,
VIH = VDD â0.2 V.
6. Input pullup current measured with VIL = 0.2 V.
MC68HC05C8A ⢠MC68HCL05C8A ⢠MC68HSC05C8A Data Sheet, Rev. 5.1
Freescale Semiconductor
87
|
▷ |