MC68HC05C8A Datasheet, PDF (34/116 Pages) Motorola, Inc – Microcontrollers

Resets
5.4.3 COP During Stop Mode
Stop mode disables the oscillator circuit and thereby turns the clock off for the entire device. The COP
counter will be reset when stop mode is entered. If a reset is used to exit stop mode, the COP counter will
be reset after the 4064 cycles of delay after stop mode. If an interrupt is used to exit stop mode, the COP
counter will not be reset after the
4064-cycle delay and will have that many cycles already counted when control is returned to the program.
5.4.4 COP During Self-Check Mode
The COP is disabled by hardware during self-check mode.
MC68HC05C8A • MC68HCL05C8A • MC68HSC05C8A Data Sheet, Rev. 5.1
34
Freescale Semiconductor