SGTL5000XNAA3R2 Datasheet, PDF (67/68 Pages) Freescale Semiconductor, Inc – Low Power Stereo Codec with Headphone Amp

REVISION HISTORY
REVISION HISTORY
REVISION DATE
3.0
6/2010
4.0
9/2010
5.0
5/2013
DESCRIPTION
• Conversion from the old Freescale form and style to the current version. No existing content has been added,
altered, or removed.
• Corrected Pin 4 explanation (32-pin package) and added Pin 3 (32-Pin package) to Table 1.
• Corrected LINEOUT - 100 dB SNR (-60 dB input) and -85 dB THD+N (VDDIO = 3.3 V) in features
• Added note for HP_VGND and CPFILT in pin definition table
• Moved Recommended Operating Conditions to separate table
• Added Input/Output Electrical Characteristics
• Corrected LINEIN Input Level from 0.75 to 0.57
• Corrected Table 7 Test Conditions unless otherwise noted: VDDIO = 1.8 V, VDDA = 1.8 V, TA = 25 °C, Slave
mode, fS = 48 kHz, MCLK = 256 fS, 24 bit input.
• Added note for HP_VGND and CPFILT to Typical Applications introduction
• Corrected pin nomenclature as required for consistency
• Clarified Bits 3:0 in Figure 27
• Corrected pin name in Figure 3 and Table 1
• Corrected address name in Figure 6, I2C, SPI
• Changed limits on LINEOUT Output level
• Changed 0x00 = sets to 12 dB to 11.75 dB, and deleted “To convert dB to hex value, use Hex Value = 4* dB value
+ 47” on tables 49, 50, 51, 52 and 53.
• Revised back page. Updated document properties. Added SMARTMOS sentence to first paragraph.
• Added comment for “new designs” where applicable
• Corrected pin designations in the Pin Connections section
• Changed limits and conditions for LINEOUT Output level and LINEOUT Output level
• Added two new application diagrams in Typical Applications section
Analog Integrated Circuit Device Data
Freescale Semiconductor
SGTL5000
67